Philips DCR 9001/02 TV Receiver User Manual


 
60
EN
4.3 Rear panel
1 RF OUT (*) ................................................ RF output used to connect your receiver to a VCR/TV set to watch analogue
channels only, or to connect another receiver
2 RF IN (*)
..................................................... RF input used to connect the RF coaxial cable from the wall socket
3 USB (*)
....................................................... For future use
4 L/R AUDIO OUT (*)
................................... Left/Right analogue audio outputs to connect your receiver to your TV
left/right analogue inputs
DIGITAL AUDIO OUT (*)
.......................... Digital audio output to connect your receiver to the digital coaxial input of
your digital audio equipment
5 YPbPr VIDEO OUT (*)
.............................. Outputs to connect your receiver to the YPbPr or component inputs of your
TV set or video projector
(2)
6 EXT1/TO TV (*) ......................................... SCART
(1)
output used to connect your TV set or video projector
(2)
7 EXT2/AUX (*) ............................................ SCART
(1)
output to connect your video recorder or DVD player
8 SPDIF (*)
.................................................... Digital audio output to connect your receiver to the digital optical input of
your digital audio equipment using an optical cable (not supplied)
9 HDMI (*)
.................................................... HDMI socket used to connect your TV set HDMI input
10
................................................................... Label showing the type and serial number of the receiver
11 230V~50Hz 15W max(**)
.......................... Socket to connect the mains cord
* Safety Extra Low Voltage
** Hazardous Voltage
(1)
SCART is also called Euroconnector or Péritel.
(2)
If you consider using a video projector, refer to its user manual for the best video format to feed it. If necessary, refer to
paragraph 13.5.2 to properly set the EXT1/EXT2 SCART Output.
T
Y
I O
P
REW U
P
10
11
Q