Filter
Top Products
Clock (VCR) 19
- M E N U -
B TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT [OFF]
CLOCK SET
LANGUAGE SELECT
English
• If the clock has never been set,
the CLOCK SET Menu may
appear when you press SETUP.
If so,follow the instructions
from step 3 above.
• Press DISPLAY repeatedly to
show the time on the TV
screen.
• Power failures of more than 30
seconds can erase the Clock
Setting.
• To reset the clock,follow steps
1-2.Select the information you
want to change using s or B.
When the information is
flashing,use K or L to enter
the correct information.Press
CLEAR to set the clock.
Helpful Hints
2-9
DVDVCR SETUP
INPUT MENU
REC SPEED MODE
ANGLE SEARCH REPEAT
DISPLAY SUBTITLE ZOOM
TIMER SET
REPEAT
A B
AUDIO
BACKPAUSESTOP
PLAY
OK
FFW
REW
CLEAR TITLE
DISC
TRACKING
OPEN/CLOSE
12
6
54
7 8 9
0
+10
3
1
MONTH DAY YEAR
0 3 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
Follow these steps to set the VCR clock.Make sure:
1
Press VCR, then press SETUP so MENU appears.If
the clock has never been set,the CLOCK SET Menu may
appear when you press SETUP.If so,follow the instructions
from step 3 on this page.
2
Press K or L to select CLOCK SET. Then, press
B.
3
While the MONTH space is flashing, press K or
L until the month appears. Then, press B.
4
While the DAY space is flashing, press K or L
until the day appears. Then, press B.
5
While the YEAR space is flashing, press K or L
until the year appears. Then, press B. The day of
the week will appear automatically.
6
While the HOUR space is flashing, press K or L
until the hour appears. Then, press B.
7
While the MINUTE space is flashing, press K or
L until the minute appears. Then, press B.
8
While the AM or PM space is flashing, press K or
L to point to AM or PM.
Your selection will flash on the screen in the AM/PM space.
9
Press CLEAR or B to start the clock.
9