Filter
Top Products
English
40 Audio Language, Stereo Sound Mode
Audio Language
You can select a language for DVDs during playback if multiple
languages are available.
1
Press DVD to put the DVD/VCR in DVD mode.
DVD light will appear on the front of the DVD/VCR.
2
During DVD playback, press AUDIO repeatedly to
choose one of the available languages.
Audio Display
appears at the top of the TV screen,and the new audio will
be heard. The display will disappear after about 5 seconds.
The Audio Display may show the current settings for the
Dolby Digital or Multi-channel sound,if they are available on
the disc,and the sampling rate of the disc.The number of
available languages appears after the “ / ” at the right of the
display ( /3,for example).
• If a language is not available
after pressing AUDIO several
times,the DVD does not have
that language.
• Some DVDs only let you
change the language in the Disc
Menu.
• Audio languages may be
abbreviated (such as ENG for
English).Or,three dashes (- - -)
may appear instead of an
abbreviation.
• Audio language selection cannot
be made during Rapid Play with
Voice.(Refer to page 33.)
Helpful Hints
Stereo Sound Mode
Adjust Stereo Sound to determine whether you will hear the left
channel,the right channel or both channels (stereo) during Audio
CD playback.
If you connected the DVD/VCR to a Stereo using the COAXIAL
DIGITAL AUDIO OUT jack as described on page 12,you cannot
adjust stereo sound mode.
1
Press AUDIO repeatedly during Audio CD
playback to choose STEREO, L-ch or R-ch.
Both right and left channels
are heard (stereo).
STEREO
Only the left channel
is heard.
L-ch
Only the right channel
is heard.
R-ch
Example: English audio
1.ENG Dolby D 3/2.1ch 48k/3
1
DVDVCR SETUP
INPUT MENU
REC SPEED MODE
ANGLE SEARCH REPEAT
DISPLAY SUBTITLE ZOOM
TIMER SET
REPEAT
A B
AUDIO
BACKPAUSESTOP
PLAY
OK
FFW
REW
DISC
1
DVDVCR SETUP
INPUT MENU
REC SPEED MODE
ANGLE SEARCH REPEAT
DISPLAY SUBTITLE ZOOM
TIMER SET
REPEAT
A B
AUDIO
BACKPAUSESTOP
PLAY
OK
FFW
REW
DISC
2