Philips HTS5510C/75 DVD Player User Manual


 
42
Selecting a preset radio
station
Press TUNER on the remote, then press
S / T to select a preset number
(or use the numeric keypad on the
remote.)
The waveband, preset number and
radio frequency will appear.
Deleting a preset radio
station
1
In tuner mode, press S / T on the
remote to select a preset radio station.
2 Press and hold 9 until FM XX DELTD,
MW XX DELTD, appears.
X is the preset number.
The radio station continues to play but
has been deleted from the preset list.
Tuner Operations (continued)
Changing tuning grid (not available
for all versions)
In North and South America, the
frequency step between adjacent channels
in the MW band is 10 kHz (9 kHz in some
areas). The preset frequency step in the
factory is 9 kHz.
IMPORTANT!
Changing the tuning grid will erase all
previously stored preset radio
stations.
STANDBY ON
SOURCE
PLAY/PAUSE
1 Press TUNER on the remote (or press
SOURCE control on front panel) to
select FM or MW.
2 Press STANDBY ON to switch the
DVD system to standby mode.
3 While holding down SOURCE and S
PREV on the front panel, disconnect and
connect the power cord to the power
supply again.
The display will show "GRID 9" or
"GRID 10".
Helpful hints:
GRID 9 and GRID 10 indicate that the
tuning grid is in step of 9 kHz and 10 kHz
respectively.
The FM tuning grid also will be changed
from 50 kHz to 100 kHz or vice versa.