Filter
Top Products
Installing the TV
• Place your TV on a stable and strong base.
• Leave at least a free pace of 5 cm on both
sides and 10 cm from the top for good
ventilation of the set.
• Do not cover the ventilation openings with
items such as newspapers, cloths etc.
Connecting the mains
Insert the main plug into the wall socket and
switch on. Please refer to the specification at
the back of the TV for the correct operating
voltage.
Installing the remote control
• Remove the cover at the back of the remote
control.
• Insert the correct type and size batteries into
the compartment making sure they are the
right way around.
• You can secure your batteries by fastening
an appropriate screw into the hole of the
battery cover.
Tips and Alerts
• Never try repairing the set by yourself,
always contact a qualified technician.
• Your TV contains material which can be
recycled and reused by specialized
companies. Please find out about local
regulations on the disposal of your old TV
set.
• TV consumes energy in the stand-by mode.
Energy consumption contributes to air and
water pollution. We advise you to switch off
your TV overnight instead of leaving it in
stand-by mode.
Accessing the Set-up Menu
Accessing the Set-up Menu, while the set is in
the Security High state, can only be done by a
T374AH Institutional Setup remote Menu
command. While the set is in the Security
Standard State the Setup Menu may be
accessed with a normal guest cursor remote
control by a sequence of numbers
(319753MUTE).
• Language
The Language function is shown in the
Menu as "LANGUAGE", and its valid states
are "ENGLISH", "DEUTSCH", "FRANCAIS",
"ITALIANO".
• No. of Programs
This item of the Setup Menu is activated by
highlighting the item using the cursor
up/down keys, then pressing the cursor right
key. Number of TV, Pay TV, Radio and Info
programs can be set and stored.
• TV Installation
When this menu is open, all the protections
are inactive. To exit any menu press Menu
button.
Input
The "Input" menu item selects the desired
input source that will be assigned to the
program. Possible values are Front End,
AV1, and AV2YC (internal interface, for
system TVs only).
System
Sets for East regions will have 2 states,
WEST EU (PAL/SECAM-BG) and EAST
EU (PAL/SECAM-DK).
Sets for West regions will have 3 states,
WEST EU (PAL/SECAM-BG), UK (PAL-I),
FRANCE (SECAM-L/L').
Manual Search
3 digits can be entered for a frequency in
MHz or right cursor for auto search;
during frequency entry the not yet entered
digits are displayed as dashes "-".
Program no.
The programme type can be selected with
the cursor left/right buttons. These
buttons will toggle between all available
types: "TV", "INFO", "PAY-TV"; if the radio
is external (no radio tuner is present in
the chassis), "RADIO" is displayed, if the
radio is internal there will be a separate
radio installation menu. If the program
number of a certain type is 0, the
corresponding type is not displayed.
1
PHILIPS Institutional TV - Instructions for use
GB