Filter
Top Products
During the initial installation, you will perform some basic
settings of the DVD recorder system.You can change all
settings of the initial installation later on.To change these
settings please see the chapters of “System settings” and
t Picture and u Language in “User preferences”.
Basic settings
Please observe the screen of your TV and the display of the
DVD recorder system.
1 Switch on your TV.
2 Connect the supplied mains cable to AC MAINS ~ and to
the wall socket. If the DVD recorder system is in demo
mode, press 2 to cancel the demo mode.
➜ IS TV ON? is displayed on the DVD recorder system.
3 If necessary set the TV to the correct audio/video channel
for the DVD recorder system. Such channels may be called
AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
Note: If your TV supports EasyLink, the TV and the DVD
recorder system exchange information via the SCART cable.
In this case, EasyLink loading data from TV, please
wait will appear on the TV. Some of the following settings will
be done automatically then.
4 ➜ The menu Menu Language appears on the TV screen.
Press 3 or 4 to select the language in which the display
messages should appear on the TV screen.Then press OK.
5 ➜ The menu Audio language appears.
Press 3 or 4 to select the language in which DVDs should
preferably be played, if the language is available on the disc.
Then press OK.
6 ➜ The menu Subtitle Language appears.
Press 3 or 4 to select the language in which subtitles
should preferably be displayed, if subtitles in the language
are available on the disc.Then press OK.
Note: Some DVDs may override your audio and subtitle
language selection. In this case, you have to select the audio
and subtitle language in the DVDs Disc Menu.
7 ➜ The menu TV Shape appears.
Press 3 or 4 to select the screen format.This setting will
have an effect only with DVDs supporting different screen
formats.
➜ 4:3 letterbox: for a wide-screen picture (cinema
format) on a conventional 4:3 TV set with black borders
at the top and bottom of the screen.
➜ 4:3 panscan: for a full-height picture with cropped
edges.
➜ 16:9: for a wide-screen TV set.
Then press OK.
8 ➜ The menu Country appears.
Press 3 or 4 to select the country where the
DVD recorder system is used. If your country does not
appear, select Other.Then press OK.
9 ➜ If you have connected the antenna - press OK
appears.
If you connected the DVD recorder system to a TV antenna
or a cable TV system, press OK.
If not, connect the antenna as described in “Connecting
the TV antenna”, then press OK.
➜ Searching for TV channels appears and the
automatic search for TV channels starts.This may take
several minutes.As soon as the search is complete,
Autom. search complete appears.
10 ➜ Time, Year, Month and Date appear.
If the settings are correct continue with step 13, else press 4
repeatedly to select either Time, Year, Month or Date.
11 Press 1 or 2 or 0–9 repeatedly to set the correct value.
12 If necessary, repeat steps 10 and 11 until all settings of the
time and date are correct.
13 Press OK.
➜ CONTINUE WITH SPECIAL AUDIO SETTINGS is
scrolled on the DVD recorder system.
14 Continue with “Advanced settings”.
Initial installation
16
English
TV
CDR/TAPE
CAM 1/2
CD
TUNER
SAT
MENU
VCR/GAME
DVD/MON
REC/OTR
SELECT
AUDIODISC
É
É
0
OK
H
1
3
2
4
6
5
79
8
SYSTEM
2
É
É