Philips LX9000R DVD Player User Manual


 
G Zoom
This function allows you to enlarge the video picture and to
pan through the enlarged picture.
1 Press ÉÅ on the remote control during playback.
The still picture is shown.
2 Press SYSTEM MENU on the remote control during playback
to enter the system menu.
The system menu bar appears.
3 Press 1 or 2 on the remote control as often as necessary
until G is selected.
4 Press 4 or 3 on the remote control as often as necessary
to activate the zoom and to select the desired zoom factor.
Zooming starts.
As soon as zooming is finished, press OK to pan is
displayed.
5 Press OK on the remote control to confirm the selection.
The panning icons 4,3,1 and 2 appear on the screen.
6 Use 4,3,1 or 2 on the remote control to pan all over the
screen.
00
To see the zoomed picture without the system menu bar
press OK on the remote control.
00
To exit the zoom mode and to resume playback press
PLAY/PAUSEÉÅ.
00
To switch off the system menu bar press SYSTEM MENU
on the remote control.
F Camera angle
Some DVDs contain scenes recorded from different camera
angles. In this case you can select among the different angles.
1 Press ÉÅ on the remote control during playback.
The still picture is shown.
2 Press SYSTEM MENU on the remote control to enter the
system menu.
The system menu bar appears.
3 Press 1 or 2 on the remote control as often as necessary
until F is selected.
Note: If F is not selectable, the current scene was recorded
from one camera angle only.
4 Press 4 or 3 on the remote control to select the desired
camera angle or use the numerical keys on the remote
control to key in the desired angle number directly.
After a few seconds, playback continues with the selected
angle. F remains shown until a scene starts that was
recorded from one camera angle only.
00
To switch among the different angles press 4 or 3 on the
remote control.
Playback features
36
English
N
;
1:57:36
0:12:55
pause
AB CDEF
GG
2171offnooff
!@
3
4
N
;
1:57:36
0:12:55
pause
AB CDEF G
2171off1/2 off
!@
3
4