Filter
Top Products
Filter function and parental
control (DVD-Video discs only)
Movies on pre-recorded DVD-Video discs may contain
scenes not suitable for children. Some of those discs may
contain “Parental control” rating information that applies to
the entire disc or to certain scenes on the disc.The rating
information on the disc is country dependent.The levels
reach from 1–8:
– 1: Recommended as acceptable for viewers of all ages.
– 2: Reserved
– 3: Parental guidance suggested.
– 4: Material is unsuitable for children under age 13.
– 5: Reserved
– 6: Recommended that parents restrict children under 17
from viewing or allow to view only when supervised
by a parent.
– 7: Not recommended for children under age 17
– 8: For adults only
You can set a filter value on the DVD recorder system. If
during playback a scene that contains a “Parental control”
rating information is detected, the set filter value on the
DVD recorder system is compared to it. For example, if a
filter value of 5 is set on the DVD recorder system, only discs
with a “Parental control” rating of a lower or equal level (1, 2,
3, 4 and 5) will play. If the scene’s rating is higher (e.g. 8) than
the set filter value, an alternative scene (if available) will be
played. If there is no alternative scene available, playback is
stopped and the 4-digit code has to be entered again.
Activating and deactivating the filter function
1 Switch your TV set on. If necessary set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
2 Press 2 to switch on the DVD recorder system.
3 Press SYSTEM MENU on the remote control.
➜ The system menu bar appears.
4 Press 1 on the remote control as often as necessary until
A is selected.
5 Press 4 or 3 on the remote control as often as necessary
until w Features is selected.
6 Press 2 on the remote control to confirm the selection.
7 Press 2 on the remote control to confirm the selected line
Access control, Enter code….
8 Use the numerical keys on the remote control to enter a
4-digit code. If you entered a new code you have to enter
the same code again as confirmation.
9 Press 4 or 3 on the remote control as often as necessary
until the line Parental level is selected.
10 Press 2 on the remote control to confirm the selection.
➜ The menu bar with the different filter values appears.
11 Press 4 or 3 as often as necessary or use the numerical
keys on the remote control to select one of the desired
filter values:
➜ --:The filter function is switched off.All scenes will be
played.
➜ 1: Scenes of level 1 only will be played.
➜ 2: Scenes of levels 1–2 will be played.
➜ 3: Scenes of levels 1–3 will be played.
➜ 4: Scenes of levels 1–4 will be played.
➜ 5: Scenes of levels 1–5 will be played.
➜ 6: Scenes of levels 1–6 will be played.
➜ 7: Scenes of levels 1–7 will be played.
➜ 8: Scenes of levels 1–8 (all scenes) will be played.
12 Press OK on the remote control to confirm the selection.
13 Press SYSTEM MENU on the remote control to switch off
the system menu bar.
Access control
60
English
TV
CDR/TAPE
CAM 1/2
CD
TUNER
SAT
MENU
VCR/GAME
DVD/MON
REC/OTR
SELECT
AUDIODISC
É
É
É
É
0
OK
H
1
3
2
4
6
5
79
8
SYSTEM
2
A BCDEFG
2 17 off off no off
t
u
ww
x
<
<
1
Child lock
Access control Parental level
Status box Change country
Auto resume Change code
Low power standby
PBC
--
3
4
2
#
#