Filter
Top Products
23
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, the »
display shows
.
7RGHDFWLYDWHVOHHSWLPHU
1 Press SLEEP repeatedly until >2))@ is
displayed.
When sleep timer is deactivated, »
disappears on the display.
/LVWHQWRDQH[WHUQDOGHYLFH
You can listen to an external device through
this unit.
1 Press 03/LQN to select the MP3 link
source.
Connect the supplied MP3 link cable to:
03/LQN jack (3.5 mm) on the unit
the headphone jack on an external
device.
3 Start to play the device (see the device
user manual).
2WKHUIHDWXUHV
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, USB or TUNER is activated to play at a
preset time.
1 Ensure that you have set the clock
correctly.
In standby mode, press and hold 7,0(5.
3 Press ',6&, 781(5 or USB to select a
source.
4 Press 7,0(5WRFRQÀUP
The hour digits are displayed and begin »
to blink.
5 Press / to set the hour.
6 Press 7,0(5WRFRQÀUP
The minute digits are displayed and »
begin to blink.
7 Press / to set the minute.
8 Press 7,0(5WRFRQÀUP
The timer is set and activated.»
$FWLYDWHDQGGHDFWLYDWHDODUPWLPHU
1 Press 7,0(5 repeatedly to activate or
deactivate timer.
If timer is activated, the display shows »
.
If timer is deactivated, »
disappears on
the display.
7LS
Alarm timer is not available in MP3 LINK
mode.
If DISC/USB source is selected and the
track cannot be played, tuner is activated
automatically.
English
EN