Filter
Top Products
22
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, USB or TUNER is activated to play at a
preset time.
1 Ensure that you have set the clock
correctly.
2 In standby mode, press and hold TIMER.
3 Press DISC, TUNER or USB to select a
source.
4 Press TIMERWRFRQÀUP
The hour digits are displayed and begin »
to blink.
5 Press / to set the hour.
6 Press TIMERWRFRQÀUP
The minute digits are displayed and »
begin to blink.
7 Press / to set the minute.
8 Press TIMERWRFRQÀUP
The timer is set and activated.»
Activate and deactivate alarm timer
1 Press TIMER repeatedly to activate or
deactivate timer.
If timer is activated, the display shows »
.
If timer is deactivated, »
disappears on
the display.
Tip
Alarm timer is not available in MP3 LINK
mode.
If DISC/USB source is selected and the
track cannot be played, tuner is activated
automatically.
Select sampling rate
You can select the Linear Pulse Code
Modulation (LPCM) output sampling rate. The
higher the sampling rate, the better the sound
quality.
1 Press SYSTEM MENU.
2 Select [AUDIO SETUP] (audio setup) >
[DOWN SAMPLE] (down sample), then
press
.
3 Select an option, then press OK.
[ 48K]: For discs recorded at sampling
rate of 48kHz.
[ 96K]: For discs recorded at sampling
rate of 96 kHz.
[ 192K]: For discs recorded at
sampling rate of 192 kHz.
4 Press SYSTEM MENU to exit.
Enable night mode
Night mode makes loud sound level softer so
that you can watch the DVD movies at a low
volume, without disturbing others.
1 Press SYSTEM MENU.
2 Select [AUDIO SETUP] (audio setup)
> [NIGHT MODE] (night mode), then
press
.
3 Select an option , then press OK.
[ON] (on): Enjoy quiet viewing at
night.
[OFF] (off): Enjoy surround sound
with its full dynamic range.
4 Press SYSTEM MENU to exit.
EN