Filter
Top Products
62
English
Disc Operations
● When playback of program comes to an end,
the playback will come to the stop position and
the program will be erased.
To reivew program
During program playback, press PROG on the
remote control.
➜ The program list is displayed on the TV
screen.
● To exit the program list, use 1 2 on the remote
control to select Exit, then press OK.
For MP3/JPEG
1 Use 1 2 3 4 on the remote control to
highlight desired MP3 file displayed on the TV
screen.
● You may press DISC MENU once or more to
switch between filelist and album(folder) display.
Press 2 to access the MP3 files in one folder.
2 Press PROG on the remote control to add a
MP3 file to the program list.
➜ “Add To Program List” is displayed briefly
at the bottom of the TV screen.
To playback program
1 Press DISC MENU once or more until
program list is displayed on the TV screen.
➜ “Program list” is displayed briefly at the
bottom of the TV screen.
2 Press OK when a program file is highlighted.
To erase a program
● In the program list, use 1 2 3 4 on the
remote control to highlight the a program you
want to delete, then press PROG to delete.
Programming tracks/chapters
For DVDs/VCDs/CDs
You can select and program up to 20 desired
tracks/ chapters for playback in the desired
sequence. If you like, store any track/chapter/
title more than once.
1 Press PROG on the remote control
to activate programming mode.
➜ On the TV screen, the program pop-up
appears, and the first program position is
highligted for you to enter the desired track/
chapter/title numbers.
(DVD program for example)
2 Use the Numeric Keypad (0-9) on the
remote control to enter your desired track/
chapter/title number using 2 digits.
E.g. Track/chapter 7, press 0 and then, 7.
● Programming is possible only in the sequence
starting from 01.
● For DVDs, you need to input title number
(TT), then input chapter number (CH).
● To access another 10 program sequence in the
next page, use 1 2 3 4 on the remote
control to select Next, then press OK.
➜ After title/chapter/track number is correctly
entered in a program position, the next
program sequence will be highlighted for you
to program.
3 To start playback, use 1 2 3 4 on the
remote control to select Start, then press OK
on the remote control.
➜ The display on the system shows PROG.
Erasing program
● To exit program menu without programming,
navigate to select Exit, then press OK, or
simply press PROG.
● During playback of program, press PROG to
pop up the program menu to select Stop, then
press OK.
pg042-079_MCD305_93-Eng 2005.11.18, 16:4862