Filter
Top Products
34
English
Ta pe Operation/Recording
Preparation for recording
1 Select TAPE source.
2 Load a recordable tape into the tape deck with
the full spool to the left.
3 Prepare the source to be recorded.
DISC – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
● To stop recording, press 9 (STOP9 on the
remote).
● It is not possible to activate the timer function.
Synchro start CD recording (for
CD only)
1 Select DISC source.
● You can programme the tracks in the order you
want them to be recorded (refer to “Disc
Operations - Programming favorite tracks”).
2 Press RECORD to start recording.
➜ Playing of the disc programme starts
automatically. It is not necessary to start the
DVD player separately.
One touch recording
1 Select DISC, TUNER or AUX source.
2 If necessary, start playback of the selected
source.
3 Press RECORD to start recording.
Recording timer
To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1 Select the preset radio station to record from
(refer to “Radio Reception - Tuning to preset
radio stations”).
2 In standby mode, press TIMER SET3 (TIMER
on the remote) for more than two seconds.
➜ “SELECT SOURCE” scrolls.
3 Press SOURCE repeatedly to select TUNER
REC.
4 Press TIMER SET3 (TIMER on the remote)
to confirm the source.
➜ “SET ON TIME” is displayed and the clock
digits for the hours flash.
5 Press TUNING S/T to set the hours.
6 Press TIMER SET3 (TIMER on the remote)
again.
➜ The clock digits for the minutes flash.
7 Press TUNING S/T to set the minutes.
8 Press TIMER SET3 (TIMER on the remote)
to confirm the recording start time.
➜ “SET OFF TIME” is displayed and the clock
digits for the hours flash.
9 Repeat steps 5-7 to set the finish time.
0 Press TIMER SET3 (TIMER on the remote)
to confirm the timer settings.
➜ is shown and the recording timer is now
set.
Note:
– The recording timer will not be activated if the
system is in tape play mode.
pg001-pg040_MCD510_14-Eng 2005.12.29, 17:3134