Filter
Top Products
30
English
Other Functions
Setting the clock
1 In Standby mode, press and hold CLOCKon
the remote control until the time flashes on the
display.
➜ ”SET CLOCK” is displayed briefly. Then, the
hour digits flash on the display screen.
2 Tu rn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to set
the hours.
3 Press CLOCK to confirm.
➜ The minute digits flash on the display screen.
4 Tu rn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to set
the minutes.
5 Press CLOCK again to confirm the clock
setting.
Notes:
– This system only supports 24-hour mode.
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.
Setting sleep/wake-up timer
Sleep timer setting
In power-on mode, the sleep setting enables
the system to switch to standby mode
automatically at a preset time.
1 In power-on mode, press SLEEP on the remote
control repeatedly to select a preset time.
➜ The selections are as follows (time in
minutes):
-- ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70 ➜
80 ➜ 90 ➜ --
2 When you reach the desired length of time, stop
pressing SLEEP.
➜ ”SLEEP” appears.
To deactivate the sleep timer
● Press SLEEP repeatedly until “00” is displayed,
or press STANDBY-ON B (B on the
remote control).
In standby mode, the timer setting enables
the system to switch on automatically at a set
time.
Wake-up timer setting
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
1 Press and hold TIMER until the time flashes on
the display.
➜ ”SET TIMER” scrolls. Then, the hour digits
flash on the display screen.
2 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to set
the hours.
3 Press TIMER to confirm.
➜ The minute digits flash on the display screen.
4 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to set
the minutes.
5 Press TIMER to confirm the time setting.
➜ ”OFF” flashes on the display screen.
6 Tur n VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to
select “ON”.
➜ icon appears on the display screen.
To deactivate the timer
● Select “OFF” at Step 6.