Filter
Top Products
34
English
System Menu Options
COMPONENT
Sets the video output according to your video
connection. This setting is not required if you are
using the AV OUT jack to connect the DVD
micro system to your TV.
➜ S-VIDEO: Select this if you have connected
the DVD micro system to your TV using S-Video
jack.
➜ Pr/Cr Pb/Cb Y: Select this if you have
connected the DVD micro system to your TV
using Component video jacks.
Notes:
– When the player is set to Y Pb Pr (YUV), some
TV may not properly synchronise with the player
on the SCART connector.
– This option is available only when the "HDMI"
is set to "OFF".
TV MODE
Selects interlace or Progressive-SCAN video
output mode when Pr/Cr Pb/Cb Y is selected.
➜ PROGRESSIVE-SCAN and
INTERLACE.
In the progressive scan mode, you can enjoy the
high quality picture with less flickers. It only
works when you have connected the DVD
player's Y Pb Pr jacks to your TV that supports
the progressive video input. Otherwise, a
distorted picture will appear on the TV. For
proper progressive scan set up, see “Getting
started-Setting up Progressive Scan feature”.
Note:
– This option is available only when the "HDMI"
is set to "OFF".
PICTURE SETTING
This menu helps you to set the video quality.
1 Press 3 4 to highlight “PICTURE SETTING”.
2 Press 2 or OK to enter PICTURE SETTING.
The options included in PICTURE SETTING
page are: “SHARPNESS”, “BRIGHTNESS”,
“CONTRAST”, “GAMMA”, “HUE”,
“SATURATION” and “LUMA DELAY”.
PICTURE SETTING
SHARPNESS
Adjusts the sharpness level.
➜ HIGH, MEDIUM and LOW.
BRIGHTNESS
Adjusts the brightness level. Range: -20-+20.
CONTRAST
Adjusts the contrast level. Range: -16-+16.
GAMMA
Adjusts the gamma level.
➜ HIGH, MEDIUM, LOW and NONE.
HUE
Adjusts the hue level. Range: -9-+9.
SATURATION
Adjusts the saturation level. Range: -9-+9.
LUMA DELAY
Adjusts the luma delay.
➜ 0 T and 1 T.
HDMI SETUP
The options included in HDMI SETUP Page are:
"HDMI" and "RESOLUTION".
HDMI
This option is used to enable/disable HDMI
output.
➜ ON: Enables HDMI output.
➜ OFF: Disables HDMI output.
RESOLUTION
You can select the resolution of the picture
according to your preference and the connected
HDMI TV.
The resolution options include 480p (60Hz),
720p (60Hz), 1080i (60Hz), 576p (50Hz), 720p
(50Hz) and 1080i (50Hz).