Filter
Top Products
4. Extra possibilities
Adding a function to the remote control
If you want to add a function to the RU510, you can contact the
Philips service line for Universal Remote Control to ask for the 3-figure code
for the extra function.
1 Keep 1 and 6 on the RU510 pressed. . . . . . . .
simultaneously for three seconds, until the
green LED flashes twice and then remains lit.
2 Press keys 9, 9 and 4, in that order.
3 Enter the 3-figure code which you received from the service line within
thirty seconds.
4 Press the key under which you want to store the new function.
– The LED flashes twice.
The extra function has been successfully added to the RU510.
• If you want to store the function under Shift in combination with
another key, first press the Shift key and then press the required
function key.
• For restoring the original function of the key,
see ‘Restoring the original functions of your remote control’.
Restoring the original functions of your remote
control
1 Keep keys 1 and 6 on the RU510
pressed simultaneously for three seconds,
until the green light flashes twice and then
remains lit.
2 Press keys 9, 8 and 1, in that order.
– The light flashes twice.
All original functions have now been restored
and any extra functions have been deleted.
M
E
N
U
O
K
SHIFT
123
456
78
0
9
SHIFT
123
456
78
0
9
SHIFT
123
456
78
0
9
SHIFT
123
456
78
0
9
9
Instructions for use
English
XP SBC RU 510/87.3 06-02-2004 12:36 Pagina 9