Pioneer DV-2020 DVD Player User Manual


  Open as PDF
of 2
 
DV-3022V/DV-3020V
DV-2022/DV-2020
Operating Instructions
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
K002_B2_En
Printed in Thailand
© 2011 PIONEER CORPORATION.
All rights reserved.
DVD Player
J2P00621A SH
00/00
K
Discover the benefits of registering your product online at
http://www.pioneer.co.uk (or http://www.pioneer.eu).
Download an electronic version of this manual from our website.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly.
After you have finished reading the instructions, put them away in a safe place for future reference.
1
Beforeyoustart
Loadingthebatteriesin
theremotecontrol
• Opentherearlidandinsertthebatteries.
WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a heater.
This can cause batteries to leak, overheat, explode or catch
fire. It can also reduce the life or performance of batteries.
Notes
• When inserting the batteries, make sure not to damage
the springs on the battery’s () terminals.
• Do not use any batteries other than the ones specified.
Also, do not use a new battery together with an old one.
• When loading the batteries into the remote control, set
them in the proper direction, as indicated by the polarity
marks ( and ).
• Do not heat batteries, disassemble them, or throw them
into flames or water.
• Batteries may have different voltages, even if they are
the same size and shape. Do not use different types of
batteries together.
• To prevent leakage of battery fluid, remove the batteries
if you do not plan to use the remote control for a long
period of time (1 month or more). If the fluid should leak,
wipe it carefully off the inside of the case, then insert
new batteries. If a battery should leak and the fluid
should get on your skin, flush it off with large quantities
of water.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
Connections
There are three different ways to connect to this device:
using a audio/video cable, HDMI cable, or a SCART AV
cable. To connect, refer to the following.
• OnlyDV-3022VandDV-3020VhaveHDMIOUT
terminal.
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
NotesforDV-3022V/DV-3020V
• Signals can be transferred to an HDMI-compatible TV
without loss of picture or sound quality using an HDMI
cable.
Follow the TV instructions after the connections, then set
HDMIResolution (section 4).
• This player’s interface is designed according to the
High-Definition Multimedia Interface specifications.
• When an HDMI-compatible device is connected, the
resolution is displayed on the front panel display.
• The resolution of the video signals output from the
HDMIOUT terminal can be changed manually. Change
the HDMIResolution setting (section 4). Settings for two
units can be stored in the memory.
• This player is designed for connecting to HDMI-
compatible devices. It may not operate properly if
connected to DVI devices.
Playableaudiosignalsthroughthe
HDMIOUTterminal(DV-3022V/
DV-3020V)
• 44.1 kHz to 96 kHz, 16-bit/20-bit/24-bit 2-channel linear
PCM audio (including 2-channel downmixing)
• Dolby Digital 5.1-channel audio
• DTS 5.1-channel audio
• MPEG audio
Connectingusingcommercially
availablecables
• The player can be connected to an AV amplifier, etc.,
using commercially available digital audio cables.
Player’srearpanel
Player’srearpanel
Tableofcontents
<Upperhalf>
1Beforeyoustart
2Partnamesandfunctions
3
Convenientfunctions
<Lowerhalf>
4
Changingthesettings
5Playablediscsandfiles
6Troubleshooting
7Additionalinformation
What’sinthebox
• Remote Control
• AAA batteries (R03) x 2
• Warranty card
• Operating instructions (This document)
Safetycautions
2
Partnamesandfunctions
3
6
10
12
14
2
11
13
1
5
19
15
18
20
21
22
23
17
4
16
7
8
9
Note
Theillustrationsusedinthisoperatinginstructionsare
DV-3022V.
1STANDBY/ON
Press to turn the power on and off.
2Numberbuttons(0to9)
Use these to specify and play the title, chapter, track or
file. Also use to select items on MENU screens, etc.
3TOPMENU
Press to display the top menu of the DVD-Video.
4 / / /
Use these to select items, change settings and move
the cursor.
5HOMEMENU
Press to display/hide HOMEMENU.
Audio Settings
Play Mode Disc Navigator
Initial Settings
Video Adjust
HOME MENU
DVD
• AudioSettings (section 4)
• VideoAdjust (section 4)
• PlayMode (see f PLAYMODEon the right column)
• DiscNavigator (see h MENU on the right column)
• InitialSettings (section 4)
6STOP
To resume play, press STOP once during playback. If
you press PLAY after that, playback starts from the
point you last stopped.
To cancel resume play, press STOPagain while
playback is stopped.
7//
• Press during playback to fast-reverse.
• Press in the pause mode to move backward
frame-by-frame.
• Press and hold in the pause mode to play back
slowly (reverse). Releasing the button stops slow
play.
8PLAY
Press to start playback.
9PREV
Press to return to the beginning of the currently playing
title, chapter, track or file. Press twice to move back to
the beginning of the previous title, chapter, track or file.
aPAUSE
Press to stop playback temporarily. Press again to
resume.
bAUDIO
For discs or files including multiple audio streams/
channels, the audio stream/channel can be changed
during playback.
cSUBTITLE
On DVD-Video or DivX discs containing subtitles in
multiple languages, the subtitle can be changed during
playback.
dOPEN/CLOSE
Press to open and close the disc tray and load the disc.
eZOOM
Press to zoom on the image.
fDVD/USB(section3)(DV-3022V/DV-2022)
Press to switch between DVD and USB modes.
 PLAYMODE(DV-3020V/DV-2020)
• A-BRepeat
The specified section within a single title or track is
played repeatedly.
• Repeat
Plays titles, chapters, tracks or files repeatedly.
• Random
Plays titles, chapters or tracks in random order.
• Program
See section 3 for details.
• SearchMode
Plays the specified number or time within the title,
chapter, track or file.
The PlayMode function may not work for some discs
or files.
gCLEAR
Press to cancel the selected item.
hMENU
• Press to display MENU screen or DiscNavigator.
• Select the title, chapter, track or file from the Disc
Navigatorto play back.
iENTER
Use this to implement the selected item or enter a
setting that you have changed.
jRETURN
Press to return to the previous screen.
k/ /
• Press during playback to fast-forward.
• Press in the pause mode to move forward
frame-by-frame.
• Press and hold in the pause mode to play back
slowly (forward). Releasing the button stops slow
play.
lNEXT
Press during playback to skips ahead to the beginning
of the next title, chapter, track or file.
mANGLE
• On DVD-Video discs containing multiple angles, the
angle can be changed during playback.
• Press and hold during the Audio CD playback to
repeat the disc/track.
Each time you press and hold, the repeat mode
changes between the disc repeat and track repeat
mode.
nDISPLAY
The elapsed time, amount remaining, etc., is displayed.
Remotecontrol
DV-3022V
Specifications
Match the direction
of the plug to the
terminal and insert
straight.
TVorAVreceiver TVorAVreceiver
HDMIcable
(commerciallyavailable)
Audio/videocable
(commerciallyavailable)
Yellow
White
Red
DV-3022V
1
6
8
Power requirements ... . . . .AC 220 V to 240 V, 50 Hz/60 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11 W (DV-3022V), 7 W (DV-3020V), 10 W (DV-2022),
6 W (DV-2020)
Power consumption (standby)
DV-3022V/DV-3020V . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8 W
DV-2022/DV-2020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 W
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2 kg
External dimensions
. . . . . . . . . . . . . . . . .360 mm (W) x 42 mm (H) x 200 mm (D)
Tolerable operating temperature . . . . . . . . +5 °C to +35 °C
Tolerable operating humidity . . . . . . . . . . . . . . . . .5 % to 85 %
(no condensation)
AV Connector (21-pin connector assignment)
AV connector output . . . . . . . . . . . . . . . . . 21-pin connector
This connector provides the video and audio signals for
connection to a compatible colour TV or monitor.
PIN no.
1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Audio 2/R out
3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio 1/L out
4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GND
7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B out
8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Status
11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G out
15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R out
17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GND
19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Video out
21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GND
Video output
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)
Output terminal . . . . . . . . . . . . . . . . . . . . . . . . RCA terminal
HDMI output (Only for DV-3022V/DV-3020V)
Output terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-pin
Audio output (stereo L/R)
Audio output level . . . . . . . . . . .200 mVrms (1 kHz, -20 dB)
Output terminal . . . . . . . . . . . . . . . . . . . . . . . . RCA terminal
Frequency response . . . . . . . . . . . . . . . . . . . . .4 Hz to 44 kHz
Digital audio output
Coaxial digital output. . . . . . . . . . . . . . . . . . . . RCA terminal
Additional information (Only for DV-3022V/DV-2022)
USB port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A type
Notes
• The specifications and design of this product are subject
to change without notice.
• This product includes FontAvenue® fonts licensed by
NEC Corporation. FontAvenue is a registered trademark
of NEC Corporation.
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet. Since the
power cord serves as the main disconnect device for the
unit, you will need to unplug it from the AC outlet to shut
down all power. Therefore, make sure the unit has been
installed so that the power cord can be easily unplugged
from the AC outlet in case of an accident. To avoid fire
hazard, the power cord should also be unplugged from the
AC outlet when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
WARNING
Before plugging in for the first time, read the following section
carefully.
The voltage of the available power supply differs
according to country or region. Be sure that the power
supply voltage of the area where this unit will be used
meets the required voltage (e.g., 230 V or 120 V) written
on the rear panel.
D3-4-2-1-4*_A1_En
If the AC plug of this unit does not match the AC outlet
you want to use, the plug must be removed and
appropriate one fitted. Replacement and mounting of
an AC plug on the power supply cord of this unit
should be performed only by qualified service
personnel. If connected to an AC outlet, the cut-off
plug can cause severe electrical shock. Make sure it is
properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left unused
for a long period of time (for example, when on
vacation).
D3-4-2-2-1a_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
K041_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c*_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space around
the unit for ventilation to improve heat radiation (at least 10
cm at top, 10 cm at rear, and 10 cm at each side).
WARNING
Slots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product, and to protect it
from overheating. To prevent fire hazard, the openings should
never be blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the equipment on thick
carpet or a bed.
D3-4-2-1-7b*_A1_En
WARNING
This equipment is not waterproof. To prevent a fire or shock
hazard, do not place any container filled with liquid near
this equipment (such as a vase or flower pot) or expose it to
dripping, splashing, rain or moisture.
D3-4-2-1-3_A1_En
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007.
CLASS 1 LASER PRODUCT
D58-5-2-2a_A1_En
Information for users on collection and
disposal of old equipment and used
batteries
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical and
electronic products and batteries should not be mixed
with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points in accordance with your
national legislation.
By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent any
potential negative effects on human health and the
environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old
products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.
These symbols are only valid in the European Union.
For countries outside the European Union:
If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method
of disposal.
K058a_A1_En
Symbol examples
for batteries
Symbol for
equipment
Pb
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
D3-4-2-1-1_A1_En
Frontpanel
DV-3022V
SCARTAVcable
(commerciallyavailable)
TVorAV
reciever
3
Convenientfunctions
Playinginthedesired
order(ProgrammedPlay)
1
DisplaythePlayModescreen.
Select PlayMode from HOMEMENU screen.
2
SelectProgram.
Use / to select, then press ENTER or .
3
SelectCreate/Edit.
Use / to select, then press ENTER.
• The Create/Edit screen differs according to the disc
or file.
4
Selectthetitle,chapter,trackorfile.
Use / / / to select, then press ENTER.
• To add to a program, first select the place in the
program (the program step), next select the title,
chapter, track or file then press ENTER (files are
added at the end of program).
• Press RETURN to return to the previous screen. If you
return to the previous screen when inputting it, the
settings you have programmed are cleared.
• To delete a step, highlight it and press CLEAR.
5
Startplayback.
Press PLAY.
• To play the program, select PlaybackStart from the
program screen, then press ENTER.
• To resume normal playback, select PlaybackStop
from the program screen, then press ENTER. The
program remains in the memory.
• To cancel the entire program, select ProgramDelete
from the program screen, then press ENTER.
Notes
• Programs can be played repeatedly. Select Program
Repeat from Repeaton the PlayMode screen during
programmed playback.
• Programs cannot be played in random order (random
play is not possible during programmed play).
PlayinglesonUSB
devices
(DV-3022V/DV-2022)
• The player may not recognize the USB device, play files
or supply power to the USB device. For details, see When
a USB device is connected in section 6.
• Pioneer does not support that all files recorded on all
USB devices will play or that power will be supplied to
the USB device. Also note that Pioneer will accept no
responsibility whatsoever for loss of files on USB devices
caused by connection to this player.
1
SwitchtoUSBmode.
Press DVD/USB.
USb is displayed on the front panel display.
2
ConnecttheUSBdevice.
Connect the USB device to the USB port on the front
panel (section 2).
The DiscNavigatorappears automatically.
3
Startplayback.
Use / / / to select the file, then press ENTER.
• Turn the power off before removing the USB device.
• To return to DVD mode, press DVD/USB or OPEN/
CLOSE.
CopyinglesontoUSB
devices
(DV-3022V/DV-2022)
Files stored on the discs can be copied on to the USB
device through the player.
1
DisplaytheDiscNavigatorscreen.
Press MENU.
• Press STOP to stop playback if the file is being
played.
2
Selectthefile.
Use / / / to select, then press .
3
Startcopying.
Use / to select Yes, then press ENTER.
The file copying process will appear on the screen.
Notes
• Do not operate any buttons during the file copying
process.
• A folder named “PIONEER” is automatically created on
the USB device.
The copied files are stored in this folder.
<Onlyforthefrontpanel>
1Disctray
2Frontpaneldisplay
3HDMIindicator(DV-3022V/DV-3020V)
Lights when the de vice connected to the HDMIOUT
terminal is recognized.
4OPEN/CLOSE
5USBport(typeA)(DV-3022V/DV-2022)
Englishontopside.
Italianosullatoopposto.
6
Troubleshooting
7
Additionalinformation
• Incorrect operation is often mistaken for trouble or
malfunction. If there is something wrong with this player,
check the symptoms below.
Sometimes the trouble lie in another component
connected to this player. Inspect the component and
electrical appliances being used. If the trouble cannot be
rectified after checking the items below, ask your nearest
Pioneer authorized service center or your dealer to carry
out repair work.
• The player may not operate properly due to static
electricity or other external influences. In such cases,
normal operation may be restored by unplugging the
power cord then plugging it back in.
Difference in volume between DVD and CD.
The volume may sound different due to differences in
how the signals are recorded on the disc.
Disc cannot be played or disc tray opens automatically.
If the disc is dirty, wipe the dirt off the disc (section 7).
Set the disc with the printed side facing up.
Check the disc’s region number, and if the number is
compatible for playback on the player (section 5).
Only the discs with the appropriate region number or
“ALL” can be played.
The power turns off automatically.
If AutoPowerOff is set to On, the power turns off
automatically if no operation has done for over 30
minutes (section 4).
Picture is stretched, or aspect ratio cannot be changed.
Refer to the TV’s operating instructions and set the TV’s
aspect ratio properly.
Set TVScreen properly (section 4).
Picture is disturbed or dark during playback.
When the player and the TV are connected via a video
deck, “analog copy protect function” may cause the
picture being played on the video deck not to display
properly. Connect the player and TV directly.
Set the TV system properly. The factory default setting
is AUTO. If the picture is distorted, switch the TV
system to the one used in your country or region (NTSC
or PAL) (section 7).
96 kHz/88.2 kHz digital audio signals are not output
from the COAXIALDIGITALAUDIOOUT terminals.
Set 96kHzPCMOut to 96kHz > 48kHz.
The 96 kHz/88.2 kHz digital audio signals of copyright-
protected discs cannot be output.
Folder or file names are not recognized.
This player can recognize up to 299 folders on one
disc and 648 files within one folder. Depending on the
folder structure, however, the player may not be able to
recognize certain folders or files.
Folder or file names are not displayed or properly
displayed
Only 1-byte alphanumeric characters can be displayed.
Folder and file names including characters other than
1-byte alphanumeric characters may be displayed for
example as F_007 or FL_001, and the characters may
be garbled.
Much time is required to play JPEG files.
The player may take longer to display large files.
Black bars are displayed when playing JPEG files.
Black bars may be displayed along the top and bottom
or sides when JPEG files with different aspect ratios
are played.
WhenaUSBdeviceisconnected
(DV-3022V/DV-2022)
USB device is not recognized.
Turn the power off, then disconnect and reconnect the
USB device.
This player does not support USB hubs. Connect the
USB device directly.
This player only supports USB mass storage class
devices.
This player supports portable flash memory and digital
audio playback devices.
Only the FAT16 and FAT32 file systems are supported.
Other file systems (exFAT, NTFS, etc.) are not
supported.
If the USB device is equipped with an AC adapter, use
the USB device with the AC adapter connected.
Some USB devices may not be recognized properly.
File cannot be played.
Copyright-protected files cannot be played.
Files stored on a computer cannot be played.
It may not be able to play some files.
Folder or file names are not displayed or properly
displayed.
The maximum displayable number of characters for the
folder and file names on the DiscNavigator is 14.
Folder or file names are not displayed in alphabetical
order.
The order of the folder and file names displayed on the
DiscNavigator is dependant on the time and date when
the folders or files were created on the USB device.
Much time is required to recognized the USB device.
It may take longer to load data when a large capacity
USB device is connected (this could take several
minutes).
WhenconnectedtoanHDMI-
compatibledevice
(DV-3022V/DV-3020V)
Picture is not displayed.
Restore HDMIResolution to the default setting
(720x480p/720x576p) (section 4).
With some cables, 1 080p video signals cannot be
output.
Multichannel audio signals are not output.
Set HDMIOut to Auto (section 4).
Control function does not work.
Use a High Speed HDMI
®
cable.
Set Control to On on the player (section 4).
The control function does not work with devices of
other brands. Even when connected to a Pioneer
product compatible with the Control function, some of
the functions may not work.
The message CEC200 appears.
When the DiscNavigator is selected using the Flat
Screen TV’s remote controller and the player is turned
off, the message CEC200 will be displayed. This is not
a malfunction.
Turn on the player to use the function.
The player turns on or off automatically.
The player may turn on together with the TV connected
to HDMIOUT terminal. If you do not want them to turn
on at the same time, set Control to Off (section 4).
The input of the connected TV or AV system is switched
to the player’s automatically.
The input of the TV and AV system (AV receiver or
amplifier, etc.) connected to the HDMIOUT terminal
may be automatically switched to the player when
playback starts on the player or the menu screen
(HOMEMENU, etc.) is displayed. If you do not want the
connected TV and AV system (AV receiver or amplifier,
etc.) affected by the player’s operation, set Control to
Off (section 4).
LanguageCodeTable
Languagenames(codes)aninputcodes
Japanese (ja), 1001 Bhutani (dz), 0426 Kirghiz (ky), 1125 Sinhalese (si), 1909
English (en), 0514 Esperanto (eo), 0515 Latin (la), 1201 Slovak (sk), 1911
French (fr), 0618 Estonian (et), 0520 Lingala (ln), 1214 Slovenian (sl), 1912
German (de), 0405 Basque (eu), 0521 Laothian (lo), 1215 Samoan (sm), 1913
Italian (it), 0920 Persian (fa), 0601 Lithuanian (lt), 1220 Shona (sn), 1914
Spanish (es), 0519 Finnish (fi), 0609 Latvian (lv), 1222 Somali (so), 1915
Chinese (zh), 2608 Fiji (fj), 0610 Malagasy (mg), 1307 Albanian (sq), 1917
Dutch (nl), 1412 Faroese (fo), 0615 Maori (mi), 1309 Serbian (sr), 1918
Portuguese (pt), 1620 Frisian (fy), 0625 Macedonian (mk), 1311 Siswati (ss), 1919
Swedish (sv), 1922 Irish (ga), 0701 Malayalam (ml), 1312 Sesotho (st), 1920
Russian (ru), 1821 Scots-Gaelic (gd), 0704 Mongolian (mn), 1314 Sundanese (su), 1921
Korean (ko), 1115 Galician (gl), 0712 Moldavian (mo), 1315 Swahili (sw), 1923
Greek (el), 0512 Guarani (gn), 0714 Marathi (mr), 1318 Tamil (ta), 2001
Afar (aa), 0101 Gujarati (gu), 0721 Malay (ms), 1319 Telugu (te), 2005
Abkhazian (ab), 0102 Hausa (ha), 0801 Maltese (mt), 1320 Tajik (tg), 2007
Afrikaans (af), 0106 Hindi (hi), 0809 Burmese (my), 1325 Thai (th), 2008
Amharic (am), 0113 Croatian (hr), 0818 Nauru (na), 1401 Tigrinya (ti), 2009
Arabic (ar), 0118 Hungarian (hu),
0821 Nepali (ne), 1405 Turkmen (tk), 2011
Assamese (as), 0119 Armenian (hy), 0825 Norwegian (no), 1415 Tagalog (tl), 2012
Aymara (ay), 0125 Interlingua (ia), 0901 Occitan (oc), 1503 Setswana (tn), 2014
Azerbaijani (az), 0126 Interlingue (ie), 0905 Oromo (om), 1513 Tonga (to), 2015
Bashkir (ba), 0201 Inupiak (ik), 0911 Oriya (or), 1518 Turkish (tr), 2018
Byelorussian (be), 0205 Indonesian (in), 0914 Panjabi (pa), 1601 Tsonga (ts), 2019
Bulgarian (bg), 0207 Icelandic (is), 0919 Polish (pl), 1612 Tatar (tt), 2020
Bihari (bh), 0208 Hebrew (iw), 0923 Pashto, Pushto (ps), 1619 Twi (tw), 2023
Bislama (bi), 0209 Yiddish (ji), 1009 Quechua (qu), 1721 Ukrainian (uk), 2111
Bengali (bn), 0214 Javanese (jw), 1023 Rhaeto-Romance (rm), 1813 Urdu (ur), 2118
Tibetan (bo), 0215 Georgian (ka), 1101 Kirundi (rn), 1814 Uzbek (uz), 2126
Breton (br), 0218 Kazakh (kk), 1111 Romanian (ro), 1815 Vietnamese (vi), 2209
Catalan (ca), 0301 Greenlandic (kl), 1112 Kinyarwanda (rw), 1823 Volapük (vo), 2215
Corsican (co), 0315 Cambodian (km), 1113 Sanskrit (sa), 1901 Wolof (wo), 2315
Czech (cs), 0319 Kannada (kn), 1114 Sindhi (sd), 1904 Xhosa (xh), 2408
Welsh (cy), 0325 Kashmiri (ks), 1119 Sangho (sg), 1907 Yoruba (yo), 2515
Danish (da), 0401 Kurdish (ku), 1121 Serbo-Croatian (sh), 1908 Zulu (zu), 2621
Country/AreaCodeTable
Country/Areaname,InputcodesandCountry/Areacode
United States, 2119, us Switzerland, 0308, ch Norway, 1415, no
Argentina, 0118, ar Sweden, 1905, se Pakistan, 1611, pk
United Kingdom, 0702, gb Spain, 0519, es Philippines, 1608, ph
Italy, 0920, it Thailand, 2008, th Finland, 0609, fi
India, 0914, in Taiwan, 2023, tw Mexico, 1324, mx
Indonesia, 0904, id China, 0314, cn Brazil, 0218, br
Australia, 0121, au Chile, 0312, cl France, 0618, fr
Austria, 0120, at Denmark, 0411, dk Belgium, 0205, be
Netherlands, 1412, nl Germany, 0405, de Portugal, 1620, pt
Canada, 0301, ca Japan, 1016, jp Hong Kong, 0811, hk
Korea, Republic of, 1118, kr New Zealand, 1426, nz Malaysia, 1325, my
Singapore, 1907, sg
The factory default settings are indicated in italic.
AudioSettingsparameters
Sound Retriever (High/Low/Off)
• The sound of a WMA or MP3 file is played with high
sound quality. This is only valid for files with the
extension “.wma” or “.mp3”.
• The effect depends on the file. Try different settings, and
choose the one providing the good effect.
Equalizer (Off/Rock/Pop/Live/Dance/Techno/Classic/
Soft)
• Select according to the genre of music to be listened to.
Audio DRC (High/Medium/Low/Off)
• This makes loud sounds weaker and weak sounds
louder.
• This setting only affects Dolby Digital sound.
•
The effect depends on the volume of the connected units.
Try different settings, and choose the one providing the
strongest effect.
Dialog (High/Medium/Low/Off)
• Change this setting if the sound of the dialogs is too low.
About Sound Retriever function
When audio data is removed during the compression
process, sound quality often degrades. The Sound Retriever
function automatically enhances compressed audio and
restores CD quality sound.
VideoAdjustparameters
Sharpness (Fine/Standard/Soft)
• Adjusts the picture’s sharpness.
Brightness (-20 to +20)
• Adjusts the picture’s brightness.
Contrast (-16 to +16)
• Adjusts the ratio of the brightness of the brightest and
darkest portions of the picture.
Gamma (-3 to +3)
• Adjusts the look of the dark portions of the picture.
Hue (green 9 to red 9)
• Adjusts the balance between green and red.
Chroma Level (-9 to +9)
• Adjusts the density of the colors. This setting is effective
for sources with many colors, such as cartoons.
Brightness, Contrast, Gamma, Hue and ChromaLevel are
set to 0 upon purchase.
InitialSettingsparameters
• The player’s detailed settings can be changed here.
• InitialSettings cannot be selected during playback.
DigitalAudioOutsettings
HDMI Out (DV-3022V/DV-3020V)
• Select the audio signals to be output from the HDMI
OUT terminal (LPCM(2CH)/Auto/Off) according to the
connected HDMI-compatible device.
Digital Out
•
Select whether to output digital audio signals (On) from the
COAXIALDIGITALAUDIOOUT terminals or not (Off).
Dolby Digital Out
• Select whether to output Dolby Digital audio signals
(Dolby Digital) or to convert them into linear PCM
signals (DolbyDigital > PCM), according to the
connected unit.
DTS Out
• Select whether to output DTS audio signals (DTS) or not
(Off), according to the connected unit.
96 kHz PCM Out
• Select whether to output 96 kHz audio signals (96kHz) or
to convert them into linear PCM signals (96kHz >
48kHz), according to the connected unit.
MPEG Out
• Select whether to output MPEG audio signals (MPEG) or
to convert them into linear PCM signals (MPEG > PCM),
according to the connected unit.
VideoOutputsettings
TV Screen
• Change the picture’s display format (4:3(LetterBox)/4:3
(Pan&Scan)/16:9(Wide)/16:9(Compressed)), according
to the connected TV.
The player's factory default settings are set as below.
DV-3022V/DV-3020V . . . . . . . . . . . . . . . . . . . . . . 16:9 (Wide)
DV-2022/DV-2020 . . . . . . . . . . . . . . . . . . . . 4:3 (Letter Box)
• 16:9(Compressed) can only be set on DV-3022V and
DV-3020V.
HDMI Resolution (DV-3022V/DV-3020V)
• Change the resolution of the video signals output from
the HDMIOUT terminals (720x480i/720x576i/720x480p/
720x576p/1280x720p/1920x1080i/1920x1080p).
HDMI Color (DV-3022V/DV-3020V)
• Change the video signals output from the HDMIOUT
terminal (Fullrange RGB/RGB/Component).
Deep Color (DV-3022V/DV-3020V)
• Select Auto when the connected TV or monitor is
compatible with Deep Color (Auto/Off).
Languagesettings
Audio Language
• Change the language when listening to the sound of
DVD-Video discs (English/available languages/Other
Language).
Subtitle Language
• Change the language of the subtitles displayed for
DVD-Video discs (English/available languages/Other
Language).
DVD Menu Lang.
• Change the language used for the menu displays of
DVD-Video discs (w/Subtitle Lang./available languages/
OtherLanguage).
Subtitle Display
• Select whether to display subtitles (On) or not (Off).
Displaysettings
OSD Language
• Change the language of the operation messages (Play,
Stop, etc.) displayed on the TV screen (English/available
languages).
Angle Indicator
• Select whether to display the angle mark on the TV
screen (On) or not (Off).
On Screen Display
• Select whether to display operation messages (Play,
Stop, etc.) on the TV screen (On) or not (Off).
Optionssettings
Control (DV-3022V/DV-3020V)
• Select whether to operate the player using the remote
control of the AV component connected using an HDMI
cable (On) or not (Off).
Parental Lock
• Restrict DVD-Video viewing (Password/LevelChange/
CountryCode).
DivX VOD
• Display the registration code required for playing DivX
VOD files (Activate/Deactivate).
Auto Power Off
• Select whether to turn the power off automatically (On)
or not (Off). When set to On, the power automatically
turns off if no operation is performed for 30 minutes or
more.
Restoringallthesettingstothe
defaults
While the player is in the standby mode...
PressSTANDBY/ONwhilepressing.
Use the buttons on the front panel.
4
Changingthesettings
Do not place objects on the player.
Do not place any objects on top of the player.
Do not obstruct the ventilation holes.
Do not use the player on shaggy rugs, beds, sofas, etc., or
wrapped in cloth, etc. Doing so will prevent the heat from
dispersing, leading to damage.
Do not expose to heat.
Do not place the player on top of an amplifier or other
component that generates heat. When placing it in a rack,
to avoid the heat given off by the amplifier or other audio
component, place it on a shelf below the amplifier.
Turnofftheplayer’spowerwhen
notusingit.
Depending on signal conditions, striped patterns may
appear on a TV screen and noise may enter the sound of
radio broadcasts when the player’s power is on. If this
happens, turn the player’s power off.
Aboutcondensation
If the player is moved suddenly from a cold place into a
warm room (in winter, for example) or if the temperature
in the room in which the player is installed rises suddenly
due to a heater, etc., water droplets (condensation) may
form inside (on operating parts and the lens). When
condensation is present, the player will not operate
properly and playback is not possible. Let the player stand
at room temperature for 1 or 2 hours with the power turned
on (the time depends on the extent of condensation). The
water droplets will dissipate and playback will become
possible. Condensation can also occur in the summer if the
player is exposed to the direct wind from an air-conditioner.
If this happens, move the player to a different place.
Cleaningtheproduct
• Unplug the power cord from the power outlet when
cleaning the player.
• Clean the player using a soft cloth. For tough dirt, apply
some neutral detergent diluted in 5 to 6 parts water to a
soft cloth, wring out thoroughly, wipe off the dirt, then
wipe again with a soft, dry cloth.
• Alcohol, thinner, benzene, insecticides, etc., could cause
the print or paint to peel off. Also, leaving rubber or vinyl
products in contact with the player for long periods of
time could mar the cabinet.
• When using chemical-impregnated wipes, etc., read the
cautions included with the wipes carefully.
Cautionforwhentheunitis
installedinarackwithaglassdoor
Do not press OPEN/CLOSE on the remote control to open
the disc tray while the glass door is closed. The door will
hamper the movement of the disc tray, and the unit could
be damaged.
Cleaningthelens
The player’s lens should not become dirty in normal use,
but if for some reason it should malfunction due to dust
or dirt, consult your nearest Pioneer authorized service
center. Although lens cleaners for players are commercially
available, we advise against using them since some may
damage the lens.
Aboutcopyrights
This item incorporates copy protection technology that is
protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Handlingdiscs
Storing
Always place discs in their cases and store them
vertically, avoiding places hot, humid, exposed to direct
sunlight and extremely cold.
Be sure to read the cautions included with the disc.
Cleaningdiscs
Discs may not play if there are fingerprints or dust on
them. In this case, use a cleaning cloth, etc., to gently
wipe the disc from the inside towards the outside. Do not
use dirty cleaning cloths.
Do not use benzene, thinner or other volatile chemicals.
Also do not use record spray or antistatic agents.
For tough dirt, apply some water to a soft cloth, wring
out thoroughly, wipe off the dirt, then wipe off the
moisture with a dry cloth.
Do not use damaged (cracked or warped) discs.
Do not let the signal surface of discs get scratched or
dirty.
Do not place two discs in the disc tray, one on top of the
other.
Do not attach pieces of paper or stickers to discs. Doing
so could warp discs, making it impossible to play them.
Also note that rental discs often have labels attached to
them, and the label’s glue may have oozed out. Check
that there is no glue around the edges of such labels
before using rented discs.
Aboutspeciallyshapeddiscs
Specially shaped discs (heart-
shaped, hexagonal, etc.) cannot
be played on this player. Do not
attempt to play such discs, as they
could damage the player.
Aboutcondensationondiscs
Water droplets (condensation) may form on the surface of
discs if they are moved from a cold place (particularly in
winter) into a warm room. Discs may not play normally if
there is condensation on them. Carefully wipe the water
droplets off the surface of the disc before loading it.
Abouttrademarks
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing, LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
SettingtheTVsystem
• If the picture of the disc being played is distorted, switch
the TV system to the one used in your country or region.
• When the TV system is switched, the types of discs that
can be played are limited.
• The factory default setting is AUTO.
While the player is in the standby mode...
PressSTANDBY/ONwhilepressing.
Use the buttons on the front panel.
The power turns on and the TV system switches as
shown below.
• AUTONTSC
• NTSCPAL
• PALAUTO
Typesof
discs/files
Format
Playersetting
NTSC PAL AUTO
NTSC NTSC
PAL NTSC
PAL NTSC PAL PAL
no disc
— NTSC PAL
NTSC or
PAL
Cautionsonuse
Whenmovingtheplayer
When moving the player, check first that there is no
disc loaded and that the disc tray is closed. Then press
STANDBY/ON on the player (or STANDBY/ON on the
remote control), wait for the OFF indicator on the front
panel display to turn off, then unplug the power cord.
Moving the player with a disc inside it could result in
damage.
Placeofinstallation
• Choose a stable place near the TV or stereo system
being used with the player.
• Do not place the player on top of a TV or color monitor.
Also install it away from cassette decks and other
devices easily affected by magnetic forces.
Avoid the following types of places:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot places
• Places exposed to vibrations
• Places in which there is much dust or cigarette smoke
• Places exposed to soot, steam or heat (kitchens, etc.)
5
Playablediscsandles
Discsthatcannotbeplayed
• Blu-ray discs
• HD DVDs
• AVCHD
• AVCREC
• DVD-Audio discs
• DVD-RAM discs
• SACDs
• CD-G
• Discs recorded with packet writing
• Programs that can be recorded only once and that are
(already) recorded on a DVD-R/-RW/-R DL
Aboutregionnumbers
All DVD-Video discs carry a region mark (number) on the
case. The mark (number) denotes the region(s) of the
world in which the disc is compatible. Your DVD player
also has a region mark (number), which you can find on
the rear panel.
If you try to play a disc of an incompatible region,
“IncompatiblediscregionnumberCan’tplaydisc” will
be displayed on the screen and you will not be able to play
the disc. Discs marked “ALL” can be played in any player.
The diagram below shows the various DVD regions of
the world.
3
1
2
2
5
5
6
2
1
4
4
3
RegardingcopyprotectedCDs
This player is designed to conform to the specifications
of the audio CD format. This player does not support the
playback or function of discs that do not conform to these
specifications.
Playingdiscscreatedoncomputers
orBD/DVDrecorders
•The player may not be able to play discs recorded using
a computer. Record discs in a format playable on this
player. For details, contact the dealer.
• The player may not be able to play discs recorded using
a computer or a BD/DVD recorder, if burn quality is not
good due to characteristics of the disc, scratches, dirt on
the disc, dirt on the recorder’s lens, etc.
Playableles
• Only discs recorded in ISO9660 Level 1, Level 2 and Joliet
can be played.
• Files protected by DRM (Digital Rights Management)
cannot be played.
• Files other than the ones below (WMV, MPEG4-AAC, etc.)
are not guaranteed to play.
Supportedvideoleformats
DivX
• DivX is a media technology created by DivX, Inc. DivX
media files contain image data.
• DivX files may also include such advanced playback
functions as menu screens and selection of multiple
subtitle languages/audio tracks.
• DivX®, DivX Certified® and associated logos are
trademarks of DivX, Inc. and are used under license.
Displaying external subtitle files
• The font sets listed below are available for external
subtitle files. You can see the proper font set on-screen
by setting the SubtitleLanguage in section 4 to match
the subtitle file.
• This player supports the following language groups:
Group1
Afrikaans (af), Basque (eu), Catalan (ca), Danish
(da), Dutch (nl), English (en), Faroese (fo), Finnish
(fi), French (fr), German (de), Icelandic (is), Irish
(ga), Italian (it), Norwegian (no), Portuguese (pt),
Rhaeto-Romanic (rm), Scottish (gd), Spanish (es),
Swedish (sv)
Group2
Albanian (sq), Croatian (hr), Czech (cs), Hungarian
(hu), Polish (pl), Romanian (ro), Slovak (sk),
Slovenian (sl)
Group3
Bulgarian (bg), Byelorussian (be), Macedonian (mk),
Russian (ru), Serbian (sr), Ukrainian (uk)
Group4
Hebrew (iw), Yiddish (ji)
Group5
Turkish (tr)
• Some external subtitle files may be displayed incorrectly
or not at all.
• For external subtitle files the following subtitle format
filename extensions are supported (please note that
these files are not shown within the disc navigation
menu): .srt, .sub, .ssa, .smi
• The filename of the movie file has to be repeated at the
beginning of the filename for the external subtitle file.
• The number of external subtitle files which can be
switched for the same movie file is limited to a maximum
of 10.
Supportedimageleformats
JPEG
• Resolution: Up to 3 072 x 2 048 pixels
• This player supports baseline JPEG.
• This player supports Exif Ver.2.2.
• This player does not support progressive JPEG.
Supportedaudioleformats
• This player does not support VBR (Variable Bit Rate) and
lossless encoding.
Windows Media™ Audio (WMA)
• Sampling frequencies: 32 kHz, 44.1 kHz and 48 kHz
• Bit rate: Up to 192 kbps
• This player supports files encoded using Windows Media
Player Ver. 7/7.1, Windows Media Player for Windows XP
and Windows Media Player 9 Series.
• Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United States
and/or other countries.
• This product includes technology owned by Microsoft
Corporation and cannot be used or distributed without a
license from Microsoft Licensing, Inc.
MPEG-1 Audio Layer 3 (MP3)
• Sampling frequencies: 32 kHz, 44.1 kHz and 48 kHz
Playableleextensions
Video files
.divx .avi
• Files not containing DivX video signals cannot be played,
even if they have the extension “.avi”.
Image files
.jpg .jpeg
Audio files
.wma .mp3
Playablediscs
DVD-Video discs
DVD-R/-RW/-R DL and
DVD+R/+RW/+R DL discs recorded in
the Video mode
DVD-R/-RW/-R DL discs recorded in the
VR mode
Video CDs (including Super VCDs)
Audio CDs
CD-R/-RW/-ROM discs containing
music recorded in the CD-DA format
JPEG files recorded on DVD-R/-RW/-R DL
discs, CD-R/-RW/-ROM discs
DivX video files recorded on
DVD-R/-RW/-R DL discs, CD-R/-RW/-ROM
discs
WMA files recorded on DVD-R/-RW/-R DL
discs, CD-R/-RW/-ROM discs
MP3 files recorded on DVD-R/-RW/-R DL
discs, CD-R/-RW/-ROM discs
FUJICOLOR-CD
KODAK Picture CD
• Onlythediscsthathavebeenfinalizedcanbeplayed.
•
is a trademark of DVD Format/Logo Licensing
Corporation.
•
is a trademark of FUJIFILM Corporation.
•
This label indicates playback compatibility with DVD-RW
discs recorded in VR format (Video Recording format).
However, for discs recorded with a record-only-once
encrypted program, playback can only be achieved using
a CPRM compatible device.
Notes
This player does not support multisession discs or
multiborder recording.
Multisession/multiborder recording is a method in which
data is recorded on a single disc in two or more
sessions/borders. A “session” or “border” is one
recording unit, consisting of a complete set of data from
lead-in to lead-out.