Filter
Top Products
10
En
TROUBLESHOOTING
Manual Disc Ejection
If the tray fails to open and all other methods have been exhausted, use the method
below to open the drive tray.
1) Shut down the PC.
2) Wait for a minimum of 60 seconds to allow the disc to stop spinning.
3) Insert a straightened paper clip or small wire into the manual eject hole.
4) Press smoothly but firmly until the tray protrudes by at least a ½ inch (5 mm to
10 mm).
5) Gently pull the tray straight out and remove the disc.
Notes:
To prevent personal injury or damage to the drive, do NOT force the tray open while the
disc is still spinning.
Do not place objects in front of the tray while in operation.