Pioneer PDP-5030HD Flat Panel Television User Manual


 
E-5
Preparation
Installing the Plasma Display
Locating
Avoid the direct sunlight. Keep enough ventilation.
The length of the system cable used to connect the
Plasma Display and the Media Receiver is about 3
m (118 inch).
Because the Plasma Display is heavy, be sure to
move it by more than two persons.
L
If you place anything on top of the Media Receiver it will
not receive enough ventilation and not operate properly.
A
Keep enough space around the upper and back parts
when installing in order to ensure ventilation around the
backside.
Using the optional PIONEER stand
For details on installation refer to the instruction
manual provided with the stand.
L
This product may be used only with model PDK-TS01
stand, use with other stands may result in instability
causing possible injury.
Using the optional PIONEER speakers
For details on installation refer to the instruction
manual provided with the speaker.
L
Operating Environment
Operating environment temperature and humidity: e0°C to
e40°C (e32F to e104F); less than 20 % to 80% RH (cooling
vents not blocked)
Avoid installing in the following locations:
Under direct exposure to sunlight,
Under strong artificial light,
In high humidity,
Poorly ventilated.
Over
10 cm
(3
15
/16
inch )
Over 50 cm
(19
11
/16 inch)