Filter
Top Products
Controls and displays
03
26
En
Chapter 3
Controls and displays
The following illustrations show the DV-59AVi,
but controls and displays for the DV-S969AVi
are the same except where indicated.
Front panel
1
STANDBY/ON
(DV-59AVi)
Press to switch the player into standby.
POWER
(DV-S969AVi)
Press to switch the player on or off (the
player can be put into standby using the
remote control; the
STANDBY
indicator
above the button lights when in standby).
2 i.LINK indicator
Lights when this player is recognized by
another i.LINK compatible component.
3 HDMI indicator
Lights when this player is recognized by
another HDMl or DVI/HDCP compatible
component.
4 PROGRESSIVE button/indicator
Press to switch the component video output
mode between progressive and interlace. The
indicator lights in progressive scan mode.
See also
Component Out
on page 65.
•
DV-S969AVi only
–
This player is compat-
ible with both PAL and NTSC progressive
scan formats. However, your TV must also
be progressive scan compatible to take
advantage of this feature.
5 PURE AUDIO button/indicator
When the player is stopped, press to switch
off/on the front panel display and disable the
video and digital outputs*. Use this when you
want to hear audio from the analog outputs
with no interference from other signals (when
listening to a DVD-Audio disc, for example).
The indicator lights when the Pure Audio
feature is switched on.
* These include i.LINK, HDMI, and the
coaxial and optical digital outputs.
STANDBY/ON
Î
AUDIO /VIDEO
‹
OPEN/CLOSE
)
*&
$! ⁄›
PROGRESSIVEHDMI PURE AUDIO
87
6
21 43
5
9 10
12131415 11
RW
COMPATIBLE
DV-59AVi.book(KU).fm 26 ページ ２００３年８月２０日 水曜日 午後６時４６分