Pioneer PDP-5080HD Flat Panel Television User Manual


 
42
En
Tuner Setup
09
4 Select the desired rating and change the setting ( /
then ENTER).
The menu is added between “Unavailable Ratings” and
“Password”.
The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
Each time you press ENTER, the setting is switched.
A lock icon appears beside the blocked rating.
When you are finished, the word “New” disappears from
the Parental Control menu.
5 Press HOME MENU to exit the menu.
Deleting new ratings
You can delete a New Parental Control menu. When deleted, the
past blocking settings you had entered are also cleared and
removed from the menu.
1 Press HOME MENU.
2 Select “Tuner Setup” ( / then ENTER).
3 Select “Parental Control” ( / then ENTER).
4 Select “Status” and then “Off” ( / then ENTER).
The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
5 Select A for “Accept” or D for “Cancel”.
The New Parental Control menu remains, however, when
the selection screen for deleting new ratings disappears in
approximately 60 seconds after no settings are entered.
6 Press HOME MENU to exit the menu.
Note
While the Parental Control menu is opened, the status display
remains unchanged even if the system had received
broadcasts carrying new ratings.
Blocking a rating causes more severe ratings to be
automatically blocked as well. Likewise, unblocking a rating
causes less severe ratings to be automatically unblocked.
Temporarily deactivating the Parental Control
When the Parental Control is working and senses a blocked TV
program (or content), the plasma display shows nothing but a
message.
The method for temporarily deactivating the Parental Control
differs, depending on the currently selected input source.
Antenna A or antenna B:
The following screen appears. Press ENTER.
Enter your four-digit password.
The password entry screen stays only for one minute. After the
screen disappears, pressing ENTER causes it to appear again.
Input 1 to Input 3:
Enter your four-digit password. You need not press ENTER first;
pressing ENTER causes the password entry screen to disappear.
The above password entry screen will also be shown during 2-
screen, picture-in-picture, and while freezing an image.
The password entry screen stays only for one minute. After the
screen disappears, pressing ENTER causes it to appear again.
A password entry screen is displayed if you select “Block” in
“Unavailable Ratings” for INPUT 4 to INPUT 7.
Parental Control
New (xxx)
New (xxx)
New (xxx)
Password
New (xxx)
Unavailable Ratings
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
XX
XX
Exit
Home Menu
Parental Control
Status
Change Password
Status
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxx
xxxxxxxxxxx
Clear Password
Exit
Home Menu
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
A
Cancel
Clear Entry
D
Enter your Password
A
Off
Parental Control
Status
Change Password
Status
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxx
xxxxxxxx
Clear Password
Exit
Home Menu
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
A
Cancel
Accept
D
Reset Digital regional ratings?
A
Off _ _ _ _
WWWWWWW
1000.0000
(Ant. B)
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Parental Control
Disable Parental Control
Enter
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Cancel
Clear Entry
D
A
Enter your Password
Parental Control
Please Input Your Password.
PDP5080HD.book Page 42 Monday, April 9, 2007 7:49 PM