Filter
Top Products
VD
Changing Initial Settings
48
Setting for Digital Output (DIGITAL OUTPUT)
Set digital output correctly to match the components you are using with this unit. There is no
need to change settings if this unit is not connected for digital output.
Precaution:
• Incorrect setting may result in noise and damage to speakers so be sure to read the manuals
of the connected components.
Move the joystick up/down to select
the “DIGITAL OUTPUT” in the second SET
UP MENU.
“DIGITAL OUTPUT” is indicated in blue. (For
details, see page 37.)
Click the joystick.
Digital output setting menu is displayed.
Move the joystick up/down to select the
desired digital output setting.
The currently set digital output setting is indicated
the mark “”. The digital output setting selected
with the joystick is indicated in blue.
Digital output Setting detail
Dolby D/LPCM Select when using a Dolby Digital compatible amp and decoder. The
Dolby Digital signal is output as it is. (Initial setting)
LPCM Select when using an amp and decoder that are not Dolby Digital
compatible. The Dolby Digital signal is converted to and output as a
linear PCM signal.
Click the joystick.
The selected digital output setting is set.
Note:
• Linear PCM output of DTS audio is not possible. If you select the LPCM setting, DTS audio
is not output.
• When using this product with a Pioneer Multi-Channel AV Master Unit with digital input
(e.g. AVM-P9000R, AVM-P9000), select the “Dolby D/LPCM” setting.
• When using this product with the “DEX-P9R” or
“DEX-P9”
, select the “LPCM” setting.
• Pressing the RETURN button takes you back to the previous display.
4
3
2
1