3
En
CAUTION:
THE STANDBY/ON BUTTON IS
SECONDARY CONNECTED AND THEREFORE
DOES NOT SEPARATE THE UNIT FROM MAINS
POWER IN STANDBY POSITION. therefore install
the unit suitable places easy to disconnect the
MAINS plug in case of the accident. The MAINS
plug of unit should be unplugged from the wall
socket when left unused for a long period of
time.
H017B_En
Operating Environment
H045_En
Operating environment temperature and
humidity:
+5ºC – +35ºC (+41ºF – +95ºF); less than 85%RH
(cooling vents not blocked)
Do not install in the following locations
÷
Location exposed to direct sunlight or strong
÷
artificial light
÷
Location exposed to high humidity, or poorly
ventilated location
VENTILATION:
European and Australian models:
When installing this unit, make sure to
leave space around the unit for ventilation
to improve heat radiation (at least 10 cm at
top, 10 cm at rear, and 10 cm at each side).
All other models:
When installing this unit, make sure to
leave space around the unit for ventilation
to improve heat radiation (at least 20 cm at
top, 15 cm at rear, and 15 cm at each side).
WARNING: Slot and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product
and to protect it from overheating, to
prevent fire hazard, the openings should
never be blocked and covered with items,
such as newspapers, table-cloths, curtains,
etc. Also do not put the apparatus on the
thick carpet, bed, sofa, or fabric having a
thick pile. H040 En
Energy-saving design
This system is designed to use 0.5 W of
electricity when power is switched to Standby.
Wall mounting the speakers
Before mounting
• Remember that this speaker system is
heavy and that its weight may cause the
wood screw to work loose or the wall to fail
to support it, in which case the speaker
system may fall on the floor. This is extremely
dangerous. Make absolutely sure that the
wall is sturdy enough to support the weight
of the speaker system. Do not mount it on
plywood boards or soft-surface walls. The
mounting screws are not included with this unit. Please
find the correct screws for your application.
Wall-mounting bracket
Wood screw
Protrude:5-7mm
• If you are unsure of the quality and/or strength of the wall, consult a professional for advice.
• Pioneer is not responsible for any accidents or damage that result from improper
installation.
5 mm
10 mm
5 mm