Filter
Top Products
10
• MONO/STEREO
Press MON button (10) to select mono or stereo mode.
In radio operation, press the button to select mono or stereo reception for radio
station. You can sometime improve reception of distant stations by select mono
mode.
• SETTING THE CLOCK
Press DSP button (5) to change the display into clock display. While the current
time is appeared on the display, press it again to return to frequency showing.
Time Setting
- Set hours:
Holding down DSP button (5) for several seconds, and the clock is blinking on
the display, press button (14) to adjust the hour.
- Set minutes:
Holding down DSP button (5) for several seconds, and the clock is blinking on
the display, press button (13) to adjust the minutes.
• LIQUID CRYSTAL DISPLAY
The LCD (4) can show the current state of the unit.
• RESET
Reset button (32) must be activated with either a ball point pen or thin metal object.
Reset button (32) is to be activated for the following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.