Radio Shack 15-1186 TV Mount User Manual


  Open as PDF
of 2
 
Cat. No. 15-1186
To mount the
TV FM Flush Mount Wall Plate
:
1. If there is no wall box, cut a 1
3
/
4
¥ 4 inch hole in the
wall at the desired location.
2. Across the top of the hole, position a flat bracket
piece a
g
ainst the inner wall surface and an an
g
led
bracket piece a
g
ainst the outer wall surface (with the
recessed part inside the hole).
3. Thread two of the supplied lon
g
bolts throu
g
h the
two outer holes on the bracket pieces.
4. Repeat Steps 2 and 3 across the bottom of the hole
so the center hole in the bottom bracket is 3
1
/
4
inches below the center hole in the top bracket (to
match the distance between the mountin
g
holes on
the wall plate).
(L) illus of hole on wall w
/
dimension lines
size to fit text margins
(R) illus of wall cross-sec
t
w/brackets and screws;
Custom Manufactured in Taiwan for RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
15-1186.fm Page 1 Thursday, July 15, 1999 1:47 PM