Filter
Top Products
Need help? Call
1-888-533-7135
8
Need help? Call
1-888-533-7135
8
OPERATION
1. Press the device key for the device you want to
control, then point the remote control at the
device and press
PWR
to turn the device on.
2. Repeat Step 1 for all other devices you want to
operate.
3. Point the remote control toward the device you
want to control, then press the appropriate
device key and the desired command keys.
Note:
The command keys on the remote control
work the same as the keys on the original
remote control; however, the labeling might dif-
fer slightly.
4. To turn off the last device you selected, press
PWR
. To turn off other devices, press the device
key for the device you want to turn off, then
press
PWR
.
PUNCH-THROUGH
The punch-through feature lets you alternately con-
trol two different devices without pressing the device
keys for each one. Here’s how it works.
Not all of the remote control’s keys are used by every
device. For example, a TV is often the only device
that uses the volume keys. After you press
TV
, then
press
VCR
, you can still use the volume control to
control the TV.
Note:
The punch-through feature might not work if
the last two devices you selected have the same (or
similar) features. For example, most TVs and some
cable converters have channel select keys on their
remote controls.
15-1930.fm Page 8 Monday, July 19, 1999 1:09 PM