Filter
Top Products
7
Using the Remote Control
Buttons
RESET
Resets video functions to factory settings.
Used to reset time for wake-up timer and
alarm.
REW (Rewind)
Rewinds the tape when the TV/VCR
is stopped.
Searches the picture in reverse during
playback.
SPEED (Tape Speed)
Selects a recording speed (S L P , S P , or L P) .
STOP
Stops functions such as record, play,
rewind, fast forward, and pause.
TRACK and
(Tracking up and down)
Lets you manually adjust tracking to
reduce the streaks that may appear in the
picture during playback.
VOL < and > (Volume up and down)
Raises and lowers sound.
Numbers (0 through 9)
Select a channel up to 99 by pressing
two numbers.
Select a cable channel over 99 by pressing
and holding 1 until 1– – appears on the
screen. Then press the other two numbers.
PAUSE
Pauses the tape during playback.
Pauses the tape during recording to
prevent recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns the TV/VCR on or off.
PREV CH (Previous channel)
Switches between the last two channels
selected.
Select one channel and then select the
other using the number buttons. Press
PREV CH to switch between the two
channels.
REC (Record)
Starts TV/VCR recording.
Used for express recording.
Remote Cleaning
This remote is designed for use in the kitchen or other areas where the remote may get dirty. To
clean this remote, use a soft cloth dampened with mild soap diluted with water. DO NOT
SUBMERGE THIS REMOTE.