RCA B27TF680 TV DVD Combo User Manual


 
Using the TV/VCR/DVDs Features
36 Chapter 3
MENU
TIM E
VIDEO ADJUST
AUDIO ADJUST
CLOSED CAPTION
TIMER RECORDINGS
LANGUAGE
SETTING
V-CHIP BLOCK
SELECT / : SET OK
PREVIOUS : QUIT MENU
INPUT SECRET NO.
- - - -
INPUT 0-9 : SET OK
PREVIOUS : QUIT MENU
V-CHIP BLOCK
MPAA
TV GUIDELINES
DOWNLOAD ON
STATUS ON
SELECT / : SET OK
PREVIOUS : QUIT MENU
V-CHIP BLOCK
MPAA
TV GUIDELINES
DOWNLOAD ON
STATUS ON
SELECT / : SET OK
PREVIOUS : QUIT MENU
Download New Rating System
You can choose to download additional new rating systems. The new rating
system is automatically set according to the ratings you have previously chosen.
1. Press TV MENU on the remote (the main MENU appears).
2. Press the up or down arrow button to select V-CHIP BLOCK and press OK
(INPUT SECRET NO. menu appears).
3. Use the number buttons to enter a number and press OK. Repeat entering
numbers until you have entered 4 numbers.
Notes: Be sure to remember your number. If you have entered a number previously,
enter that same number.
If you forget your password, unplug the TV/VCR/DVD. Press and hold both the VOL
up and STOP/EJECT buttons on the front panel while you plug in the TV/VCR/DVD.
Release the buttons after approximately two seconds. This resets the password.
4. The V-CHIP BLOCK menu appears. Use the down arrow to select
DOWNLOAD and press OK.
5. Press the down arrow to select ON and press OK. The new V-Chip Data will
not be downloaded unless you watch a channel sending the new system
data.
Note: If you watch a channel that uses the new system, PLEASE WAIT NOW
DOWNLOADING V-CHIP DATA appears.
6. Press TV MENU to exit.
Turning V-Chip Block On and Off
If you dont turn on the V-Chip feature, none of the settings for V-Chip
Rating Limits will take effect.
1. Follow steps 1-3 above to display the V-CHIP BLOCK menu.
2. Use the down arrow to select STATUS and press OK.
3. Use the down arrow to select STATUS ON or STATUS OFF and press OK.
STATUS ON V-CHIP HAS BEEN ACTIVATED appears when you tune to
a channel with a rating you have blocked. When this message appears,
press the MENU button and enter the secret code to temporarily cancel
the V-Chip block.
STATUS OFF No channels are blocked.
4. Press TV MENU to exit.