RCA DRC300i DVD Player User Manual


  Open as PDF
of 2
 
Playing a Disc
1. Press the STANDBY / ON button to turn on
the unit.
See CUSTOMIZING THE FUNCTION
SETTINGS before proceeding to step 2.
2. Press the OPEN/CLOSE button to open
the disc tray.
3. Place a disc onto the disc tray with the
label side up.
4. Press the OPEN/CLOSE button to close
the disc tray. It takes a short while for your
unit to load the disc. After loading, for most
DVDs, the unit will automatically take you
main menu or start playing.
5. If the unit does not automatically start
playing the DVD, press the PLAY
button.
Pausing Playback (Still Mode)
Press the PAUSE button on the remote. To
resume normal playback, press the PLAY
button.
Each time you press the PAUSE button, the
picture advances one frame.
Stopping Playback
• Pressthe STOP button at the location
where you want to interrupt playback. To
resume playback at the position where
the disc was stopped, press the PLAY
button.
• Ifyoupressthe STOP button twice, the
unit’s memory will be cleared and pressing
the PLAY button will reset the disc to
the beginning.
Fast Forward / Fast Reverse
1. Press the SEARCH or SEARCH
button when a disc is playing. Each time
you press the SEARCH or SEARCH
button, the playback speed changes in
the following sequence:
2. Press the PLAY button when you
reach the desired point to resume normal
playback.
Notes:
• Theunitmutessoundandsubtitlesduring
reverse and forward scan of DVDs.
• The fast playback speed may differ
depending on the disc.
Skipping to a Different Chapter/Title
• Pressthe PREV button to go back to
current or previous chapters/tracks.
• Press the NEXT button to advance
chapters/tracks.
• ForaudioCDs,usethenumberbuttonson
the remote control to jump immediately to
the desired track number.
Slow-motion Play
1. Press the SLOW button on the remote in
play mode.
• EachtimetheSLOW button is pressed, the
speed of slow-motion playback changes in
the following sequence:
SF 1/2 SF 1/3 SF 1/4 SF 1/5
PLAY SF 1/7 SF 1/6
2. Press the PLAY button to return to
normal playback speed.
Audio Selection
On some DVDs, the sound is recorded in two
or more formats. Follow the directions below
to select the preferred language and sound
system.
1. While a disc is playing, press the AUDIO
button to show the current audio format
number. e.g.
2. Press the AUDIO button repeatedly to
select the desired audio format.
Notes:
• Ifonlyoneaudioformatisrecordedonthe
DVD, the number does not change.
• Some DVDs allowyou to change audio
selections only via the disc menu. If this
is the case, press the MENU button and
choose the appropriate language on the
disc menu.
• You can select different audio channels
(Stereo, Mono L, Mono R or Mix Mono)
on an Audio CD by pressing the AUDIO
button repeatedly.
Subtitle Selection
1. While a DVD is playing, press the
SUBTITLE button to display the current
language setting, as shown in the
example.
2. Press the SUBTITLE button repeatedly to
select the desired subtitle language.
Notes:
• Some DVDs are set to display subtitles
automatically, and you cannot turn them
off even if you set the subtitle function to
off.
• Duringsomescenes,thesubtitlesmaynot
appear immediately after you select your
desired scene.
• Thenumberofsubtitlelanguagesrecorded
differs depending on the disc. If only one
language is recorded, the language does
not change.
• Thisfunctioncanonlybeusedfordiscs
on which subtitles have been recorded in
multiple languages.
• SomeDVDsallowyoutochangesubtitles
only via the disc menu. If this is the case,
press the MENU button and choose the
appropriate subtitle on the disc menu.
Angle Selection
Some DVDs contain scenes which have been
shot from a number of different angles. For
these discs, the same scene can be viewed
from each of these different angles.
1. While you are playing a DVD with different
angles recorded, press the ANGLE button
to view the number of current angles
available.
2. Press the ANGLE button repeatedly to
change the scene to the next recorded
angle. e.g.
• Afterapprox.two seconds,playbackwill
continue from the new angle you selected.
• Ifnobuttonispressedwithin10seconds,
playback continues without changing the
current angle.
Notes:
• Thisfunctioncanonlybeusedfordiscs
on which scenes shot from multiple angles
have been recorded.
• Ifonlyoneangleisrecorded,“: 1/1” is
displayed.
You can play a specific title or chapter
repeatedly. (Title repeat, chapter repeat, A-B
repeat)
Repeating a chapter
You can play the same chapter repeatedly.
1. While the disc is playing, press the REPEAT
DISC button until the REP: [ CHAPTER ]
indicator displays on the screen. The
current chapter is played repeatedly.
Repeating a title
You can play the same title repeatedly.
2. While the disc is playing, press
the REPEAT DISC button until the
REP: [ TITLE ] indicator displays on
the screen. The current title is played
repeatedly.
To resume normal playback
3. While the disc is playing, press
the REPEAT DISC button until the
REP: [ OFF ] indicator displays on the
screen.
You can play a single track and whole disc
repeatedly.
Repeating a single track
You can play the same track repeatedly.
1. While the disc is playing, press
the REPEAT DISC button until the
REP: [ REP 1 ] indicator displays on
the screen. The current track is played
repeatedly.
Repeating a whole disc
2. While the disc is playing, press
the REPEAT DISC button until the
REP: [ REP ALL ] indicator displays
on the screen. The whole disc is played
repeatedly.
To resume normal playback
3. Press the REPEAT DISC button until the
REP: [ OFF ] indicator displays on the
screen.
You can play a specific section repeatedly.
Repeating a specific section
1. While the disc is playing, press the
REPEAT A-B button at the beginning of
the section (REPEAT A- is displayed) you
want to play repeatedly.
2. Press the REPEAT A-B button again at
the end of the section ( REPEAT A-B is
displayed).
3. The unit will immediately begin replaying
your selection.
To resume normal playback
4. While the disc is playing, press the
REPEAT A-B button until the A-B CANCEL
indicator displays on the screen.
Notes:
• Some discs may not permit A-B repeat
operation.
• A-Brepeat can onlybe used withinthe
same title. If the start and end of the
section to be repeated are in different titles,
A-B repeat is cancelled.
• Youcanspecifyasegmentonlywithinthe
current title or track.
• TheA-Brepeatfunctiondoesnotoperate
in scenes where different camera angles
are recorded.
• PressREPEAT DISC button to select a
repeat playback mode (a single repeat or
all songs repeat). Press again repeatedly
to cancel this repeat playback.
4. Press the RETURN button to go back to
the previous menu.
Playing Photos
1. In iPod Home menu, use the / button
to select Photos and press the OK button.
“NavigateyouriPodPhotoLibrarydirectly
from your iPod” will appear on the screen.
2. Use the / button to navigate the iPod
menu lists and select a photo, press the
OK button to begin playback. (You may
also use the control wheel and keys on
your iPod to operate it.)
• Pressthe PAUSE button to pause, press
the PLAY button to resume .
• Pressthe / button to skip to the
previous / next photo.
3. Press the RETURN button to go back to
the previous menu.
Using a iPod Touch to view the photo
1. In iPod Home menu, use the / button
to select Photos and press the OK button.
“NavigateyouriPodPhotoLibrarydirectly
from your iPod” will appear on the screen.
2. Touchthe“Photos”selectiononiPodpanel,
and then select the photo your prefer.
3.Touchthe“ ” to confirm the photo.
4. Touchthe“Yes”toactivateiPod’svideo
output. The photo will appear on the
screen.
5. Press RETURN button to end the photo
viewing and go back to the previous
menu.
Using a iPod Classic / iPod Nano to
view the photo
1. In iPod Home menu, use the / button
to select Photos and press the OK button.
“NavigateyouriPodPhotoLibrarydirectly
from your iPod” will appear on the screen.
2. Press the / buttontoselect“Photos”,
and then press the OK button to confirm.
3. Use the button to select a photo,
press the OK button to begin playback.
4. Press OK button twice to activate photo
showing to TV screen.
5. Press RETURN button to end the photo
viewing and go back to the previous
menu.
Note :
Make sure video
out is activated in
the setting of iPod
Classic or iPod
Nano.
Playing Videos
1. In iPod Home menu, use the / button
to select Videos and press the OK button.
2. Use the / button to select from Movies,
Music Videos, TV Shows, Video Podcasts
or Rentals, press the OK button to enter.
(“NavigateyouriPodVideoLibrarydirectly
from your iPod” will appear on the screen if
your are using an iPod touch.)
3. Use the / button to navigate the iPod
menu lists and select a video, press the
OK button to begin playback. (You may
also use the control wheel and keys on
your iPod to operate it.)
• Pressthe PAUSE button to pause, press
the PLAY button to resume.
• Pressthe / button to skip to the
previous / next movie.
• Pressthe / button to begin fast
reverse/forward, press the PLAY button
to resume normal playback.
4. Press the RETURN button to go back to
the previous menu.
Note : Make sure TV Out in iPod is set to ON
when you are playing the video.
Settings
1. In iPod Home menu, use the / button
to select Settings and press the OK
button.
2. Use the / button to select from Shuffle,
Repeat or Lanuage. Press the OK button
to enter the settings.
3. Use the / button to a setting, press the
OK button to confirm.
4. Press the RETURN button to go back to
the previous menu.
• Shufe:SelectfromShufeOff,Shufe
Songs and Shuffle Albums.
• Repeat:SelectfromRepeatOff,Repeat
One and Repeat All.
• Language:SelectOSDlanguage.
WARNING: Due to the i-Pod limitation, not
all functions of some i-Pod models can be
controlled via the remote control.
If the above screen appears, you may need
to control the iPod Library directly from your
iPod.
PLAYING A DISC
This user manual explains the basic
instructions for operating this unit. Some
DVDs are produced in a manner that allows
specific or limited operation during playback.
Therefore, this unit may not respond to all
operating commands. THIS IS NOT A
DEFECT. Please refer to the instructions
accompanying the specific DVD in question
for more information about the options
available on that DVD.
may appear on the screen during
operation. It means that the desired operation
is not permitted by the unit or disc.
There are four options in the main setup
menu: System Setup, Language Setup, Audio
Setup and Video Setup.
In DVD mode, press SETUP to bring up the
main menu. Select one of the menu icons
across the top of the screen using the or
buttons. The menu’s options are displayed on
the left side of the screen. Press the , ,
or buttons to move to the option’s choices
on the right. Then press OK to select. Press
SETUP or RETURN if you want to exit.
SYSTEM SETUP
1. Press the SETUP button in DVD mode.
2. Select System Setup in the main menu
using the , , or buttons.
3. Select a menu option using the or
buttons and press OK button.
HD OUTPUT
This lets you select the resolution output
according to the connected TV. The
Composite Video Out (YELLOW jack) will be
kept in standard resolution for all HD OUTPUT
settings.
• SupportedHDJPEGmode:480p,720p,
1080Iand1080p.
VIDEO
OnlyavailablewhenHDOUTPUTis480p.
INTERLACE-YUV :
• Select if you are connecting the player
with Component Video outputs to a non-
Progressive Scan TV.
P-SCAN YPBPR :
• Selectifyouareconnectingtheplayerwith
Component Video outputs to a Progressive
Scan TV.
S-VIDEO :
• Selectifyouareconnectingtheplayerwith
S-VIDEO output to a TV with S-VIDEO
input.
TV TYPE
Depending on the format of the DVD, you can
choose the picture format (aspect ratio) best
suited to the format of your TV screen:
4:3 PS (Pan Scan)
• When wide-screen
video is played, this
mode clips the right
and left sides of
the image so that it
can be viewed on a
conventional screen.
• Some wide-screen
DVDs that do not
permit Pan Scan
mode playback are
automatically played
in letterbox mode
(black bands top and
bottom).
4:3 LB (Letter Box)
• When wide-screen
video is played
in this mode on a
conventional screen,
black bands appear
at the top and bottom
of the screen.
16:9 (Wide screen)
• Thisisthecorrectmodeforplayingwide-
screen videos on a wide-screen.
Notes :
• Thedisplayablepicturesizeispresetonthe
DVD disc. Therefore the playback picture
of some DVD discs may not conform to the
picturesizeyouselect.
• WhenyouplayDVDdiscsrecordedinthe
4:3 aspect ratio, the playback picture will
always appears in the 4:3 aspect ratio
regardless of the TV TYPE setting.
DEFAULT
It takes 3-5 seconds to reset the unit to the
factory default.
LANGUAGE SETUP
1. Press the SETUP button in DVD mode.
2. Use button to select Language Setup.
3. Use , , or button to select a
language, then press the OK button.
The screen will change to your selected
language immediately.
3. To exit the SETUP MENU and return to
the normal screen, press the RETURN or
SETUP button.
Notes:
• Some DVDs may not play in the audio
language selected. A prior language may
be programmed on the disc.
• SomeDVDsmaybesettodisplaysubtitles
in a language other than the one you
selected. A prior subtitle language may be
programmed on the disc.
• SomeDVDsallowyoutochangesubtitle
selections only via the disc menu. If this
is the case, press the MENU button and
choose the appropriate subtitle language
from the selection on the disc menu.
• Some DVDs may not include your pre-
selected language. In this case, the DVD
player automatically displays disc menus
consistent with the disc’s initial language
setting.
AUDIO SETUP
1. Press the SETUP button in DVD mode.
2. Select Audio Setup in the main menu using
the or buttons.
3. Select a menu option using the , , or
buttons and press OK button.
AUDIO OUT
Select the output sound format corresponding
to your system connection. When making
connection to a TV or stereo system via the
analog audio jacks, select PCM or RAW.
RAW: Does not have a Dolby Digital Decode.
PCM: Select when connected to a 2 channel
digital stereo amplifier.
• IfapplyHDMIconnectiontoTV,makesure
to select PCM, audio signal passing to TV
via HDMI cable.
VIDEO SETUP
1. Press the SETUP button in DVD mode.
2. Select Video Setup in the main menu using
the or buttons.
3. Select Brightness, Contrast, Hue,
Saturation or Sharpness using the or
buttons, hightlight your selections and
press OK button.
PLAYING PICTURE FILE DISC
PROGRAMMABLE MEMORY
Locating a specific chapter / track
If you know the chapter / track number you
want to play, you can locate a specifc chapter
/ track by directly selecting a chapter / track
number.
1. Press the GOTO button to search your
desired chapter / track.
2. Press or button to highlight a chapter /
track and press the corresponding number
button(s) for the chapter you want.
3. Press the OK button to confirm. The unit
will start playback about 3 seconds later.
Locating a specific title
If a DVD disc contains title numbers, you can
locate a specific title by directly selecting a
title number.
1. In stop mode, press the GOTO button.
2. Press or button to highlight a specific
field and press the corresponding number
button(s) for the title you want.
3. Press the OK button to confirm. The unit
will start playback about 3 seconds later.
Locating a specific time
You can move to a specific location by
entering its corresponding time (hours,
minutes, seconds)
1. Press the GOTO button.
2. Press or button to highlight time.
3. Press the corresponding number buttons
for the setting point you want.
4. Press the OK button to confirm. The unit
will start playback about 3 seconds later.
Notes :
• Some discs may not respond to this
process.
• Some scenes may not be located as
precisely as you specified.
• This method for accessing specic
locations is available only within the current
title of the DVD disc.
REPEAT PLAYBACK
The two types of programmed playback provided by this unit are title/chapter programmed
playback and track programmed playback.
Title / Chapter programmed playback
1. Press the MEMORY button.
2. Enter the title numbers in . Use button to move the
highlight to chapter and enter the chapter numbers in .
3. Use , , or button to move to the other field.
4. Repeat steps 2 to 3.
5. Press the PLAY button to start the programmed
playback.
Note: If you press the STOP button twice, the programmed
selection will be cleared.
Track programmed playback
1. Press the MEMORY button.
2. Enter the track numbers in .
3. Use , , or button to other field.
4. Repeat steps 2 to 3.
5. Press the PLAY button to start the programmed playback.
This unit can play picture files recorded on
CD-R and CD-RW discs.
Playing a Picture File Disc
1. Open the disc door.
2. Place a picture file disc onto the tray with
label side up.
3. Close the disc door.
4. The unit will load the disc and automatically
display the contents of the disc on the
screen, while playing the beginning of the
first picture file. These files will then be
played back one by one.
5. Press or button to select a picture file
to view.
6. Press the , , or CURSOR button
to view and select the files that you want to
view, then press the OK button to confirm
the selected file.
NOTE:
• You can press the PAUSE button to
interrupt playback, and press the PLAY
button to resume playback.
• YoucanusetheGOTO function or use the
numbered buttons to enter the number of a
picture file to quickly select the image.
• PresstheANGLE button on the remote control
torotatethepictureorientationby90°.
Folders Files within the
current folder
LOCATING A DESIRED SECTION
iPod Dock Adapter
Before connecting your iPod, you need to
install the appropriate iPod Dock Adapter
(supplied with the iPod) in the dock of the
unit.
Installing the iPod Dock Adapter
1. Push to open the iPod docking door.
2. Place your iPod Dock Adapter into the
dock until it sits firmly in place.
Removing the iPod Dock Adapter
1. Remove the iPod Dock Adapter as
shown.
2. Replace it with another one you need.
IMPORTANT:
Before docking your iPod. MAKE SURE your
iPod has the latest FIRMWARE.
Connecting your iPod
Warning: To prevent damage to the unit and/
or your iPod, connect or remove your iPod
when the unit is powered off or the unit is not
in the iPod mode.
1. Ensure the appropriate iPod Dock adapter
that was supplied with your iPod is
installed.
2. Insert your iPod into the connector in the
dock.
3. Press the SOURCE button to select the
iPod mode. Your iPod will be connected
automatically, and iPod Home menu
appears.
Note:
•Your iPod will be charged automatically
(until fully charged) once it is connected,
no matter whether the unit is in iPod mode
or not.
• Make sure the software of iPod is the
latest.
Playing Music
1. In iPod Home menu, use the / button
to select Music and press the OK button.
2. Use the / button to select from
Playlists, Artists, Albums, Songs, Genres
or Composers. Press the OK button to
enter.
3. Use the / button to navigate the iPod
menu lists and select songs, press the OK
button to begin playback. (You may also
use the control wheel and keys on your
iPod to operate it.)
• Pressthe PAUSE button to pause, press
the PLAY button to resume.
• Pressthe / button to skip to the
previous / next song.
• Pressthe / button to begin fast
reverse/forward, press the PLAY button
to resume normal playback.
Docking System for iPod
Welcom
Home
Music
Photos
Videos
Settings
Please Navigate directly on your iPod
OR
Press The [CLEAR] Key
to go back to main menu
Docking System for iPod
Welcom
Home
Music
Photos
Videos
Settings
Docking System for iPod
Welcom
Home
Music
Photos
Videos
Settings
Docking System for iPod
Welcom
Home
Music
Photos
Videos
Settings
CUSTOMIZING THE FUNCTION SETTINGS
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
AUDIO OUT
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
HD OUTPUT
VIDEO
TV TYPE
DEFAULT
Zooming into an image
While a disc is playing, press the ZOOM button to enlarge the image in several levels.
• Whileanimageiszoomed,youcanusethe , , or CURSOR button to shift the view
and display the part you want.
• Toreturntonormalview,presstheZOOM buttonuntilthe“ZOOM: OFF” shows. The screen
will return to normal.
• Whenyoureachtheedgeoftheimage,thedisplaywillnotshiftanymoreinthatdirection.
Step 2
Step 3
Step 4
Step 2
Step 3
Step 4
Display Function
While the disc is playing, press the DISPLAY button on the remote control repeatedly to display
information on operation status.
e.g.
Specifications and external appearance are
subject to change without notice.
PrintedinChina 811-300I91W011
PAN SCAN
LETTER BOX
WIDE SCREEN
Cut off when a wide-
screen video image is
played.
-
T
C
-
T
02:01:22
00:30:15
00:12:03
Chapter Remaining time
Total time
Title Elapsed time
Elapsed Time:
Elapsed time from the beginning of the
chapter/title which is currently playing.
Remaining Time:
Remaining time of the chapter/title which is
currently playing.
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
6 7 8 9 10
PLAYFORWARD x2 FORWARD x4
FORWARD x8FORWARD x20
PLAY BACKWARD x2 BACKWARD x4
BACKWARD x8BACKWARD x20
or
iPod Dock Adapter
iPod FEATURES
DRC300iIBENGREV1.indd1 7/14/20089:51:19AM