Filter
Top Products
33
Features and menus
5. Press 1 to align Green Centering. Use the arrow buttons to
center green square on screen. Press MENU when done.
6. Press 2 to align Blue Convergence. Use the arrow buttons to
align blue crosshatch to green crosshatch. Press MENU when
done.
7. Press 3 to align Red Convergence. Use arrow buttons to align
red crosshatch to green crosshatch. Press MENU when done.
8. If you want to make finer color adjustments, press 4 to select
Advanced Convergence (explained next) or press 0 to exit.
Advanced Convergence
After you have adjusted the color projection tubes as described
previously, you can make finer adjustments to specific areas of the screen
using the Advanced Convergence feature described below.
Note: Before you use the advanced convergence feature, you must
complete the previous steps to align the tubes.
1. Press the MENU button on the remote.
2. Press 3 to select the Screen option.
3. Press 4 to select the Adjust Projection TV option.
4. Press 4 to select the Advanced Convergence option (the
Advanced Convergence screen appears).
The green pattern is fixed. The red and blue patterns are adjusted to
the green pattern. The Red Convergence appears first by default.
5. Colored cross-hairs show the current adjustment position on the
grid. To move the cross-hairs to a different position, use the
CH+/- buttons on the remote to move the cross-hair highlight up
and down, and the VOL+/- buttons to move it right and left.
6. Use the arrow buttons to adjust the red pattern. Each press of
the arrow button makes a slight adjustment from the center of
the cross-hairs – you can press and hold the desired arrow
button to make a faster adjustment, and then make fine
adjustments with single presses of the arrow button.
7. Press the INFO button to switch to Blue Convergence and follow
the steps above to adjust the blue pattern.
8. Press OK to exit. You will be asked if you want to save the
adjustments.
Yes Saves adjustments
No Returns to the Advanced Convergence screen allowing
further adjustments.
Clear Exits screen without making any changes.
ADJUST PROJECTION TV
1 Green Centering
2 Blue Convergence
3 Red Convergence
4 Advanced Convergence
0 Exit
ADVANCED RED CONVERGENCE
OK Exit
CLEAR Cancel & Exit
VOL & CH Move on Grid
Arrows Adjust Red to Grid
INFO Switch to Blue