Filter
Top Products
Chapter 4 25
Other Information
Graphics contained within this publication are for representation only.
Channel Banner
There are several indicators that might appear when you press the TV or INFO buttons on the remote. This
display is called the Channel Banner. The following list describes the items on the Channel Banner screen
(left to right and top to bottom).
12:01 Displays the current time.
CC Displayed when Closed Captioning is available on the current channel.
ESPN Displays the label assigned to the current channel.
60 Displays the current channel or input channel .
Mute Mute is displayed when you mute the audio.
SAP Displayed when the current channel is broadcasting SAP (Second Audio Program) information.
Locked Displayed to indicate when Parental Controls are locked or unlocked.
SLEEP Displayed when the Sleep Timer has been set.
00:00 Displayed to count down time left on the commercial skip (SKIP) timer.
Why You Should Use the Auto Tuning Feature
The auto-tuning feature tunes the TV to the correct channel for different components you have connected
to your TV (like a VCR, DVD Player, etc.) When you set up auto tuning in the menu system you don’t have to
remember to change your TV to channel 3, for example, when you want to watch the tape in your VCR.
How to Set Up the Auto Tuning Feature
The way you set up the auto tuning feature in the TV’s menu corresponds to the component buttons on the
remote and the way you have each component connected to your TV. When you set auto tuning, you’re
telling the TV what channel to tune to when you press the VCR, DVD, or SAT•CABLE button on the remote
control.
1. Press MENU (the TV MAIN MENU appears).
2. Highlight Channel and press OK on your remote control.
3. Highlight Auto Tuning and press OK.
4. Choose which channel you would like to set:
VCR1 Select the channel that the TV tunes to when you press the VCR1 button.
VCR2 Select the channel that the TV tunes to when you press the VCR2 button.
DVD Select the channel that the TV tunes to when you press the DVD button.
AUX Select the channel that the TV tunes to when you press the AUX button (for remotes with the
AUX button).
SAT Select the channel that the TV tunes to when you press the SAT (or SAT•CABLE) button.
5. Highlight the choice that matches the way you have the component connected to this TV, and press OK.
The choices and a brief explanation follow:
Ch 3 Choose this if your component is only connected to the antenna jack on the back of the TV.
Reminder: Make sure the component’s Ch 3/4 switch is set to channel 3.
Ch 4 Choose this if your component is only connected to the antenna jack on the back of the TV.
Reminder: Make sure the component’s Ch 3/4 switch is set to channel 4.
VID Choose this if your component is connected to the Audio/Video IN jacks on the back of the TV.
The TV will tune to the VID input when you press the specified component button.
SVID (not available on models J20542 and J25400) Choose this if your component is connected to
the S-VIDEO jack on the back of the TV. The TV will tune to the SVID input when you press the specified
component button. Reminder: Make sure to also connect audio cables to get sound when using
S-Video.
If a component button has not been
programmed, its input will appear as “----.”
MAIN MENU
1 Audio
2 Picture Quality
3 Channel
4 Access & Power Options
5 Closed Captioning
6 Time and Timers
7 Parental Controls
8 Menu Language/Idioma/Langue
9 PC Video Input Controls
0 Exit
AUTO TUNING
VCR1 VCR2 DVD AUX SAT
Use ^v to change the input tuned
when key pressed, MENU to exit.
CH 4 VID SVID PC CH 3
^
12:01 CC ESPN 60
Mute SAP
Locked
SLEEP 00:00