Filter
Top Products
16
NOTE:
Memorizing channels is best accomplished during
evening “PRIMETIME” hours, as more stations are
broadcasting digital signals. Memorizing channels
can only be accomplished while a station is
broadcasting a digital signal to set that channel into
memory.
If you are unsure of the digital channels available
in your area, you may visit www.antennaweb.org to
receive a list based on your address or zip code.
New digital channels may be added to your area
periodically, it is recommended to perform the
“Automatic Search” procedure regularly.
Adding Channel
If you find a new channel unregistered, you can add
the new channel into the channel memory.
1
Tune in the new channel.
2
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
3
Press ϳ or ϴ to select “Channel”, then press ϶ or
ENTER.
4
Press ϳ or ϴ to select “Add/Delete”, then press ϶
or ENTER.
Add/Delete >>
Clear All >>
Add/Delete
Adding Channel >>
: Select ENTER:Set
5
Press ϳ or ϴ to select “Adding Channel”, then
press ϶ or ENTER. The new channel will be
added into the channel memory.
6
Press EXIT/CANCEL to return to the normal
screen.
Add/Delete channel
You can select the channel that you want to skip.
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press ϳ or ϴ to select “Channel”, then press ϶ or
ENTER.
3
Press ϳ or ϴ to select “Add/Delete”, then press
϶ or ENTER.
4
Press ϳ or ϴ to select “Add/Delete”, then press
϶ or ENTER.
5
Press ϳ or ϴ to select the channel that you want
to skip.
CH Signal
2 Analog
3 Analog Add
3-001 Digital Delete
3-002 Digital Add
4 Analog Delete
Add/Delete
: Adjust
Add
: Select
6
Press ϵ or ϶ to select “Add” or “Delete”,
whichever function you want to perform.
7
Repeat steps 5 - 6 for other channels you want to
add or delete.
•
•
•
8
Press EXIT/CANCEL to return to the normal
screen.
Clear All
All channels are deleted from the channel memory.
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press ϳ or ϴ to select “Channel”, then press ϶ or
ENTER.
3
Press ϳ or ϴ to select “Add/Delete”, then press ϶
or ENTER.
4
Press ϳ or ϴ to select “Clear All”, then press ϶ or
ENTER.
Add/Delete >>
Add/Delete
Adding Channel >>
: Select ENTER:Set
Clear All >>
5
Press EXIT/CANCEL to return to the normal
screen.
TV operation
1
To turn on the TV, press POWER.
(POWER indicator on the front of the unit
changes green. It may take approx. 10 seconds
for a picture to appear on screen.)
2
Adjust the volume level by pressing VOL + or – .
The volume level will be indicated on the screen
by blue bars. As the volume level increases, so do
the number of bars. If the volume decreases, the
number of blue bars also decreases.
3
Set the Signal Type option to the appropriate
position (see “Air/Cable selection” on page 15).
4
Press the Direct Channel Selection (0-9, –)
buttons to select the channel.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
TO SELECT ANALOG CHANNELS
1-9: Press 1-9 as needed. Example, to
select channel 2, press 2.
10-99: Press the 2 digits in order. Example, to
select channel 12, press 1, 2.
100-125: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the – button,
followed by the remaining number.
Example, to select channel 015-001, press 0, 1,
5, –, 0, 0, 1.
If a channel is selected with only audio content,
“Audio only” will be displayed on the screen.
If a channel is selected with a weak digital
signal, “Digital channel signal strength is low”
will be displayed on the screen.
The same program may be available on either
an analog channel or a digital channel. You may
choose to watch either format.
If a channel is selected to which you have not
subscribed,
“Digital channel is encrypted” will
be displayed on the screen.
•
•
•
51F0101A_eng.indd 16 3/5/08 5:05:53 PM