Filter
Top Products
34
Parental : Off
Password : Change
Enter Password
4
The parental level list will appear. Press ϳ or ϴ to
select the level 1 to level 8. The limitation will be
more severe as the level number is lowered. Then
press ENTER.
Password
1
2
3
4
5
6
7
8
Off
Parental
Level Off : The parental control setting does
not function.
Level 8 : Virtually all DVD software can be
played back.
Level 1 : DVD software for adults cannot be
played back.
Select from level 1 to level 8. The limitation will
be more severe as the level number decreases.
•
•
•
•
5
Press SETUP/TV MENU to remove the menu
screen.
NOTE:
If each setup (P.32~34) has been completed,
the unit will use these settings during DVD
playback.
Each setup will be retained in memory.
Depending on the discs, the unit may not be able to
limit playback.
Some discs may not be encoded with specific rating
level information though its disc jacket says “adult”.
For those discs, the age restriction will not work.
After the rating is locked, the setting cannot be
changed unless you enter the correct password.
Setting the new password:
1
Press SETUP/TV MENU in the stop mode or No
Disc.
Press ϳ or ϴ to select
option, then press
ϵ/϶ or ENTER.
2
Press ϳ or ϴ to select “Password”, then press ϶
or ENTER.
“Enter Current Password” screen will appear.
3
Press Number buttons (0-9) to enter the
password you have stored.
If you input a wrong number, press EXIT/
CANCEL.
•
4
Then press ENTER. “Enter New Password”
screen will appear. Press Number buttons (0–9)
to input the new password.
•
•
•
•
Parental : Off
Password : Change
Enter New Password
5
Press ENTER.
Now your new password has been set.
Be sure to remember this number!
NOTE:
If you forget your password it can be reset. With no
disc in the player and in DVD mode, press STOP on
the unit. Continue holding the button and press 7
on the remote control at the same time. “Password
Clear” appears on the screen. Now the password
has been return to the initial value (0000).
Temporary disabling of
rating level by DVD disc
Some pre-recorded DVD discs may attempt to
temporarily cancel the rating level that you have
set. You will be given the option to allow or not
allow the override.
1
Load a DVD disc (see page 26).
2
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending
on which disc is played. If you select “YES” with
ENTER key, password input screen will then
appear.
3
Enter the password with Number buttons (0-9).
Then press ENTER.
If you interrupt the entering, press RETURN.•
Enter Password
4
Playback will commence if the entered password
was correct.
NOTE:
This temporary cancellation of the rating level will
be kept until the disc is ejected.
When the disc is ejected, the original rating level will
be set again automatically.
•
•
51F0101A_eng.indd 34 3/7/08 4:29:25 PM