Filter
Top Products
fl at panel solutions
LCD TV Wall Mount
Installation Manual
MAF15BKR
Fits TVs 15”- 32”
Maximum Load
Capacity – 55 lb (25 kg)
Thank you for choosing the RCA MAF15BKR Universal Flat Panel
TV Wall Mount. This mount can be used for all major brands of
15" - 32" fl at panel TVs, 55 lbs (25 kg) or under. Before attempting
to mount your television set, please remove all parts from this
package and read the installation instructions carefully.
WARNING: Use of this mount with a TV weighing over 55
lbs. or with a screen larger than 32" could cause the mount
to fail causing property damage and/or personal injury.
1. Read these instructions carefully before you begin.
If you are unsure of any part of the process, contact
a professional contractor or installer for assistance.
Improper installation can result in injury or damage.
2. The wall or mounting surface must be capable of
supporting the combined weight of the mount and
the display; if not, the structure must be reinforced.
3. Safety gear and proper tools must be used. Failure
to do so can result in injury and/or damage. A
minimum of two people are required for installation.
Do not attempt to install this mount alone under any
circumstances.
4. Follow all instructions and recommendations
regarding adequate ventilation and suitable
locations for mounting your display. Consult the
owner‘s manual for your particular display for more
information.
5. For drywall installation, it is essential for the
wall mount plate to be attached to wall studs.
(Use a stud fi nder.)
6. Use the included hardware for mounting purposes.
This hardware has been provided to ensure a safe
and secure mount.
7. Hire a licensed electrician to relocate an electrical
outlet, if needed.
8. Be sure to purchase wires long enough to connect
the TV to the audio and video components in your
installation.
Keep your sales receipt to obtain warranty parts and
service and for proof of purchase. Attach it here and
record the model number. This number is located on
the product.
Model No. _____________________________________
Purchase Date: _________________________________
Dealer/Address/Phone __________________________
Safety precautions
Follow these precautions to ensure safe installation and mounting of your fl at panel TV.
Tools
Phillips Head Screwdriver
Ratchet or Driver with 13 mm (1/2”) Socket
Electric or Portable Drill
3/16” (4.8 mm) Drill Bit and Stud Finder for Drywall
Installation
3/8” (10 mm) Masonry Bit for Concrete Installation
Package Contents
Wall Plate (x1)
Mount Arm (x2)
Safety Bar (x1)
Instruction Manual (x1)
Hardware Kit (x1)
Preparing to install
Before beginning the installation process, verify that you have all the necessary tools on hand. The following
tools are required for proper installation:
Continues on next page...
Pour des instructions
en français, se
reporter à la page 4.
Para obtener
instrucciones en
español, consulte la
página 7.
CAUTION:
This wall mount is intended for
use only with the maximum
weight of 25 kg/55 bls. Use with
heavier than the maximum weights
indicated may result in instability
causing possible injury. Follow
the installation and operation
instructions carefully.