Filter
Top Products
Startup
5. Place dhannels in the VCR’s memory.
Channels 2 through 13 including line input
(L)
are in the VCR’s
memory when you first turn it on. Pressing
CHANNEL
up or down
stops on these channels. To get additional channels available on
your antenna or cable system, you must use the
Auto-Search
Channels
feature of the VCR. If you ever change cable or antenna
signals, you may need to Auto-Search channels again.
A.
Press
VCR1
to set remote to control VCR.
B.
Press
MENU*PROG
on the remote to see
the VCR MAIN MENU
on the TV screen. If the menu does not appear on the TV screen:
l
Make sure TV is tuned to same channel as CH3 CH4
switch on VCR or the TV’s video input (refer to TV’s
manual).
b Press
VCR1
and then press
MENU*PROG.
l
If you use a basic hookup, check
VCR
indicator in display
panel - it should be on. Press
TVWCR
to turn it on.
l
Check the connections.
C.
Press
4
to select
CHANNEL SETUP.
D.
Press
1 to
begin
Auto-Search Channels.
Wait until the channel numbers stop changing. This takes about
one to two minutes. The TV will then tune to the lowest channel
found. Pressing
CHANNEL
up or down will select only the
active channels.
The VCR automatically selects
ANTENNA
or
CABLE
of the
Tuning Mode
feature in the
CHANNEL SETUP
menu. If you
need to change the setting manually, press 3.
6. Add or remove channels from the VCR% memory.
You may want to add or remove channels if some of the channels are
not active, have weak signals, or you do not want to watch them.
A.
Press
VCR1 .
B.
Press
MENU*PROG
on the remote to see the
VCR MAIN MENU
on the TV screen.
C. Press 4 to display the
CHANNEL SETUP
menu.
D.
Press 2 to display the
ADD/REMOVE CHANNEL
menu.
E.
Follow the directions on the screen.
F.
Add or remove more channels-by entering channel numbers or
using
CHANNEL
up and down buttons.
jY(R
1 VCR Plus+ Programming
2,Timer Programming
3 Review Programs
4 Channel Setup
CHANNEL SETUP
_ 1 Auto-Search Channels
2 AddlRemqve Channels
3 Tuning Node: ANTENNA
4 Sat./Cable Box Setup
0 Exit to Main Menu
I
VCR-MAIN MENU
CH 03
is presently ADDED