Filter
Top Products
Buttonis
OFF
0
Tv*VCR VCR 2
‘00
PLAY
REW.
El
0
b
STOP
0
REC-OTR F.ADV
F.FWD
D
.bb
PAUSE
0)
VOLUME
PREV. CH. CHANNI
0
MUTE
0
MENU CLEAR SPEED EDIT
0000
PROG
Component Buttons
Press one of the buttons to set the remote to operate that component.
TV
VCR2
Turns on a compatible GE, RCA,
Turns on a compatible GE, RCA,
or ProScan TV and sets the
or ProScan VCR and sets remote
remote to control the TV.
to control the VCR when it has
See page 12.
been setup. See
page 12.
VCR1
Turns on a compatible GE, RCA,
or ProScan VCR and sets remote
to control the VCR.
VCR Function Buttons
Press VCR1 (VCR2) to set remote to control the VCR to use the function
CHANNEL A/V
Selects next higher or lower
channel in the VCR’s channel
memory.
CLEAR
Resets time counter to 0:OO:OO.
Allows you to change entries
when setting the clock or VCR for
a VCR Plus+ or timer recording.
DISPLAY
Shows VCR operating displays
on the TV screen.
Displays the time counter.
EDIT
Signals two properly connected
VCRs to begin copying a tape.
See page 26.
F.ADV
(Frame Advance)
Lets you view one frame with
each press of the button when
tape is in stop-action pause.
F.FWD
(Fast Forward)
Fast forwards the tape when the
VCR is stopped.
Searches the picture in forward
motion during playback.
INPUT
Turns the line input (L) in VCR
display panel (VG4039 only) or
VIDEO IN on TV screen on or off.
Line input refers to the signal
coming from the component
connected to the audio/video
jacks on the back of the VCR.
MENU*PROG
Displays the VCR MAIN M’ENU
on the TV screen.
Removes a menu from the
screen.
Numbers
(0 through 9 & 100)
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing 100 and then two
numbers.
Press the 100 button, then two
numbers to select a channel over
99.
Or, select a cable channel over 99
by pressing and holding 1 until
1 -- appears on the screen. Then
press the other two numbers.
OFF
Turns off VCR when remote is set
control the VCR.
10
continued on next page