Filter
Top Products
Operating Instructions
To play a tape
1.
Turn on the TV and tune it to channel 3,4, or TV‘s video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. Tape automatically begins playback if the safety
tab on the cassette has been removed and the
Auto Play
feature is turned on.
Press
PLAY,
if necessary.
Press
CHANNEL@TRACKING
on the VCR or
TRACKING
up or down on the
remote to remove any streaks from the picture if necessary.
Details qre on
page 15.
Press
STOP
on the VCR or remote.
Press
REWIND
on the VCR or
REW.
on the remote.
The VCR will automatically rewind the tape if it reaches the end of the tape
during playback. While rewinding, you can also press
POWER
on the VCR or
OFF
on the remote and the VCR will automatically turn off after rewinding.
7.
Press
EJECT
on the VCR to eject the tape once it is completely rewound.
13