Roland GR-33 Universal Remote User Manual


 
57
Chapter 6 Using the Built-in Effects
Chap.
6
BAND4 (Band 4 gain) -15–+15 dB
Specify the gain (amount of boost or cut) at 1250 Hz.
BAND5 (Band 5 gain) -15–+15 dB
Specify the gain (amount of boost or cut) at 2000 Hz.
BAND6 (Band 6 gain) -15–+15 dB
Specify the gain (amount of boost or cut) at 3150 Hz.
BAND7 (Band 7 gain) -15–+15 dB
Specify the gain (amount of boost or cut) at 4000 Hz.
BAND8 (Band 8 gain) -15–+15 dB
Specify the gain (amount of boost or cut) at 8000 Hz.
Q 0.5/1.0/2.0/4.0/8.0
Specify the range of all bands in which the level will be modified.
PAN (Output pan) L64–0–R63
Specify the stereo location of the output sound.
A setting of L64 is far left, 0 is center, and R63 is far right.
LEVEL (Output level) 0–127 #
Specify the output volume.
6: ENHANCER
Enhancer controls the overtone structure of the high
frequency range, adding sparkle to the sound and improving
the definition.
fig.6-10
SENS (Sensitivity) 0–127
Specify the depth of the Enhancer effect.
MIX (Mix level) 0–127 #
Specify the proportion by which the overtones generated by
the enhancer will be mixed with the original sound.
LOW GAIN -15–+15 dB
Specify the low frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the low
frequency range.
HIGH GAIN -15–+15 dB
Specify the high frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the high
frequency range.
LEVEL (Output level) 0–127
Specify the output volume.
7: AUTO-WAH
Auto Wah cyclically moves the frequency of a filter to
produce a wah effect (cyclic modulation of the tone).
fig.6-11
FILTER TYPE LPF/BPF
Specify the type of filter.
LPF:
The wah effect will be produced over a wide frequency range.
BPF:
The wah effect will be produced over a narrow frequency
range.
RATE 0.05–10.0 Hz
Specify the modulation frequency of the wah effect.
DEPTH 0–127
Specify the modulation depth of the wah effect.
SENS (Sensitivity) 0–127
Specify the sensitivity with which the filter will be affected.
MANUAL 0–127 #
Specify the center frequency at which the wah effect will be
produced.
PEAK 0–127
Specify how the wah effect will affect the region around the
center frequency.
Lower settings will produce a wah effect in a broad area
around the center frequency. Higher settings will produce a
wah effect in a narrow area around the center frequency.
LEVEL (Output level) 0–127
Specify the output volume.
8: ROTARY
Rotary is an effect which simulates the sound of the rotary
speakers of the past. Since the movement of the high frequency
and low frequency rotors can be specified separately, the
unique modulation can be simulated realistically. This effect is
most effective on organ-type Patches.
fig.6-12
HIGH SLOW
(High frequency slow rate) 0.05–10.0 Hz
Specify the low-speed (SLOW) rotational speed of the high-
range rotor.
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
2-Band
EQ
2-Band
EQ
Auto Wah
L out
R out
L in
R in
L out
R out
L in
R in
Rotary