Filter
Top Products
62
Chapter 6 Using the Built-in Effects
LOW GAIN -15–+15 dB
Specify the gain (amount of boost or cut) for the low
frequency range.
Positive (+) settings will emphasize (boost) the low
frequency range.
HIGH GAIN -15–+15 dB
Specify the gain (amount of boost or cut) for the high
frequency range.
Positive (+) settings will emphasize (boost) the high
frequency range.
BALANCE (Effect balance) D100:0E–D0:100E
Specify the volume balance between the original sound and
the flanger sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the flanger sound
will be output.
LEVEL (Output level) 0–127
Specify the output volume.
17: STEREO-DELAY
This is a stereo delay.
fig.6-21
FB MODE (Feedback mode) Normal/Cross
Specify the input destination to which the delay sound will
be returned.
Normal:
The left delay sound will be returned to the left input,
and the right delay sound to the right input.
Cross:
The left delay sound will be returned to the right input,
and the right delay sound to the left input.
DELAY LEFT (Delay time left) 0.0–500 ms
Specify the delay time from the original sound until the left
delay sound is heard.
DELAY RIGHT (Delay time right) 0.0–500 ms
Specify the delay time from the original sound until the right
delay sound is heard.
PHASE LEFT (Feedback phase left) Normal/Invert
Specify the phase of the left delay sound.
Normal: The phase will not change.
Invert: The phase will be inverted.
PHASE RIGHT (Feedback phase right) Normal/Invert
Specify the phase of the right delay sound.
Normal: The phase will not change.
Invert: The phase will be inverted.
FEEDBACK (Feedback level) -98–+98 % #
Specify the proportion (%) of the delay sound that is to be
returned to the input.
Positive (+) settings will return the sound to the input with
the original phase, while negative (-) settings produce an
inverted phase.
HF DAMP
200/250/315/400/500/630/800/1000/1250/1600/2000/2500/3150/
4000/5000/6300/8000 (200–8000 Hz), Bypass
Specify the frequency at which the high frequency range of
the delayed sound returned to the input will be cut.
If you do not want the sound to be cut, select Bypass.
LOW GAIN -15–+15 dB
Specify the gain (amount of boost or cut) for the low
frequency range.
Positive (+) settings will emphasize (boost) the low
frequency range.
HIGH GAIN -15–+15 dB
Specify the gain (amount of boost or cut) for the high
frequency range.
Positive (+) settings will emphasize (boost) the high
frequency range.
BALANCE (Effect balance) D100:0E–D0:100E
Specify the volume balance between the original sound and
the delay sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the delay sound
will be output.
LEVEL (Output level) 0–127
Specify the output volume.
R in R out
L in L out
Feedback
Feedback
Balance E
Balance D
Balance E
Balance D
2-Band
EQ
2-Band
EQ
When Feedback Mode parameter is Normal:
Delay
Delay
R in R out
L in L out
Feedback
Feedback
Balance E
Balance D
Balance E
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
When Feedback Mode parameter is Cross: