Filter
Top Products
5
EZ REC MODE will Automatically Finalize the disc
under the following conditions.
- When you press the OPEN/CLOSE button on your
DVD Recorder after recording on at least 30% of the
disc. The tray will open after the disc has been
finalized.
- When the disc is full, it will finalize automatically and
the Recorder will remain in stop mode.
- When you make a timer recording and it occupies at
least 30% of the disc,the disc will finalize
automatically and the Recorder will power off.
Please note that auto finalization will not work if the
Recorder has more than one Timer Recording set in
the Scheduled Record List.
English - 47
Recording
■
If you insert a new DVD-RW disc, it will be
formatted in V mode after auto initializing.
■
If you select off, you must initialize
and finalize the disc manually in the Disc
Manager menu.(see page 74)
■
The length of Recording is different according
to recording mode. (see page 44)
NOTE
This function allows you Initialize and Finalize a disc
automatically.
1
With the unit in stop/No Disc mode, press
the EZ REC MODE button on the remote
control.
2
Press the
œ √
buttons to select On, and then
press the ENTER button.
The EZ REC MODE is set up.
3
Insert a disc.
If the disc is new, it will initialize automatically.
4
Press the REC button.
EZ REC MODE