Filter
Top Products
English - 27
ConguringPictureOptions
Activating Picture Options
1.
Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the or button to select “Picture Options”, then press the
ENTER button.
Press the or button to select a particular item. Press the ENTER
button.
When you are satise with your setting, press the ENTER button.
In PC mode, you can only make changes to the “Colour Tone” and “Size”
from among the items in “Picture Options”.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected “Picture” mode.
“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.
Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing
requirements.
Auto Wide: Automatically adjusts the picture size to the “16:9” aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom
: Magnies the 16:9 wie picture (in the vertical irection) to t the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component
(1080i) signals are input.
•
•
•
•
•
•
“Auto Wide” function is available only in “TV”, “Ext.1”, “Ext.2”, “AV”, and “S-Video” mode.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
“Wie Zoom”: Press the button to Select “Position”, then press the ENTER button. Press the or button
to move the screen up/down. Then press the ENTER button.
“Zoom”: Press the button to Select “Position”, then press the ENTER button. Press the or button to
move the picture up and down. Then press the ENTER button.
Press the button to Select “Size”, then press the ENTER button. Press the or button to magnify
or reduce the picture size in the vertical direction. Then press the ENTER button.
After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:
Select “Position” by pressing the or button. Use the , , or button to move the picture.
Reset: Press the or button to select “Reset”, then press the ENTER button. You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
You can select these options by simply pressing the P.SIZE button on the
remote control.
Screen Mode: 16:9/Wide Zoom/Zoom/4:3
When setting the picture size to “Auto Wide” in a 16:9 wide TV, you can determine the picture size you want to see the
4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so
this function is intended for users to select it.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
•
•
•
•
This function is available in “Auto Wide” mode.
This function is not available in “PC”, “Component” or “HDMI” mode.
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
O
➣
➣
Picture Options
Colour Tone : Normal
Size : Auto Wide
Screen Mode : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Blue Only Mode : Off
ReturnEnter
Move
Tint (G/R) : G50/R50
Detailed Settings
PictureOptions ►
Picture Reset
Picture
BN68-01424E-02Eng-0514.indd 27 2008-05-15 ¿ÀÀü 9:34:21