Filter
Top Products
English - 30
Audio Format: MPEG/Dolby Digital
When sound is emitted from both the main speaker and the audio receiver, a around echo may occur due to the
decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker
function.
While viewing a Digital channel, this function can be selected.
You can only select the language among the actual languages being broadcast.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Audio Description
This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This
function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the
broadcaster. Users can turn the Audio Description On or Off and control the volume.
− Auio Description : On/Off
− Volume : 0~100
“Volume” is active when “Audio Description” is set to “On”.
While viewing a Digital channel, this function can be selected.
Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the sound output when the modulation signal is low.
TV Speaker: Off/On
If you want to hear the soun through separate speakers, cancel the internal amplier.
The +, – and MUTE buttons do not operate when the “TV Speaker” is set to “Off”.
When “TV Speaker” is set to “Off”, the Sound menus cannot be adjusted.
TV's Internal Speakers Audio Out (Optical, L/R Out) to Sound System
RF AV, S-Video
Component, PC, HDMI
RF AV, S-Video
Component, PC, HDMI
TV Speaker On
Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output
TV Speaker Off
Mute Mute Mute Sound Output Sound Output Sound Output
Video No Signal
Mute Mute Mute Mute Mute Mute
Sound Reset: Reset All/Reset Sound Mode/Cancel
You can restore the Sound settings to the factory defaults.
➣
➣
➣
➣
➣
➣
BN68-01424E-02Eng-0514.indd 30 2008-05-15 ¿ÀÀü 9:34:22