Samsung 610 Flat Panel Television User Manual


 
English - 53
Scanning and Switching between Anynet
+
Devices
1. Press the TOOLS button.
Then press the ENTER button to select “Anynet
+
(HDMI-CEC)”.
2. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
3. If you cannot find a device you want, press the ▲ or ▼ button to select "Searching
Connections", then press the ENTER button. The meassage "Configuring Anynet
+
connection..." is displayed. When searching devices completes, the connected devices
are listed in the Anynet
+
menu.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected
devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the POWER
button, devices connected when the TV is already on are not displayed in the device
list. In this case, select the “Searching Connections” menu to search devices.
If you have selected external input mode by pressing the SOURCE button, you cannot
use the Anynet
+
function. Make sure to switch to an Anynet+ device by using the
TOOLS button.
Setup
Anynet+ (HDMI-CEC)
: On
Auto Turn Off
: Yes
Searching Connections
Move Enter Return
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
TV Air 2
Move Enter
Return
Anynet
+
Menu
The Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected to the TV.
Anynet
+
Menu Description
View TV Switches from Anynet
+
to TV broadcast mode.
Record Starts a recording. (This menu works only for a device supporting recording.)
(Device_Name) Menu Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
(Device_Name) Operation Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD
Recorder appears.
Connect (Device_Name) Your TV connects to the corresponding device.
Receiver Sound is output through the receiver (home theater).
Setup You can set the Anynet
+
(HDMI-CEC), auto turn off, and searching connections for
using Anynet
+
.
TV Remote Control Buttons Available in Anynet
+
Mode
Device Type Operating Status Available Buttons
Anynet
+
Device
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
Numeric buttons
▲/▼/◄/►/ENTER buttons
Color buttons
EXIT button
After switching to the device, while playing a file
(Backward search)
(Forward search)
(Stop)
(Play) / (Pause)
Device with built-in Tuner
After switching to the device, when you are watching a TV
program
CH </> button
Audio Device When Receiver is activated
VOL +/- button
MUTE button
The Anynet
+
function only works when the active source on the TV remote control is set to TV.
The REC button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet
+
devices only using the TV remote
control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet
+
device.
The Anynet
+
functions do not operate with other manufacturers’ products.
The , operations may differ depending on the device.
BN68-01429F-00Eng-0416.indd 53 2008-04-16 ¿ÀÀü 10:17:58