Samsung AK68-01942G-00 Blu-ray Player User Manual


 
32 English
Setup
HDMI Format
You can optimize the color setting from the HDMI
output.
Select a connected device Type.
TV : Select if connected to a TV via HDMI.
Monitor : Select if connected to a Monitor via
HDMI.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to On
allows you to adjust the player’s HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only
on a TV supporting this frame rate. This menu can
only be selected in 1080i or 1080p HDMI output
resolution modes.
On : Movie Frame (24Fs) functions will work.
Off : Movie Frame (24Fs) functions will not work.
NOTE
If your TV does not support Movie Frame (24Fs)
function, the pop-up message will be displayed.
Progressive Mode
Set to improve picture quality when viewing DVDs.
Auto : Select this to have the player
automatically set the best picture for the DVD
you’re watching.
Video : Select for the best picture quality from
concert or TV show DVDs.
Still Mode
Set the type of picture shown when you pause
DVD playback.
Auto : Automatically set the best still picture
depending on the content.
Frame : Select when pausing a scene with a
little action.
Field : Select when pausing a scene with a lot
of action.
HDMI Deep Color
Set to output the picture from the HDMI OUT jack
with Deep Color or not. Deep Color allows more
accurate color reproduction with deeper color
depth.
Auto : The picture will be output with Deep
Color to the connected TV which supports
HDMI Deep Color.
Off : The picture will be output without Deep
Color.
Audio
Digital Output
Set Digital Output depending on the connected
receiver. (For more details, please refer to the
digital output selection on the next page)
PCM
Bitstream(Re-encode)
Bitstream(Audiophile)
NOTE
Be sure to select the correct Digital Output or you
will hear no sound or a loud noise.
If the HDMI device (Receiver, TV) is not compatible
with compressed formats (Dolby digital, DTS), the
audio signal outputs as PCM.
Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
Some Blu-ray Discs do not have BONUSVIEW audio
and Navigation Sound Effects.
This Digital Output setup does not effect the analog
(L/R) audio or HDMI audio output to your TV.
It effects the optical and HDMI audio output when
connected to a receiver.
If you play MPEG audio soundtracks, audio signal
outputs PCM regardless of Digital Output Selections
(PCM or Bitstream).
01942G-BD-C6300-XAC-ENG.indb 32 2010-06-22 오후 5:11:23