Filter
Top Products
English - 39
System Setup
CH Digit Lock
Select the sub item(Off or Lock to two digits) using
the …† buttons, then press the ENTER button.
•
Off : Select this when your cable box or satellite
receiver only accepts a three or more digit
channel number. Normally select this.
•
Lock to two digits : Select this when your cable box
or satellite receiver only accepts
a two digit channel number.
Mode for SET button
Select the sub item(Off, Mode 1 or Mode 2) using the
…† buttons, then press the ENTER button.
Select "Mode 1" or "Mode 2" if your cable box or
satellite receiver requires pressing the SET button, after
entering the channel number.
•
Off : No code is sent when the SET button is
pressed. Normally select this.
•
Mode 1 or Mode 2 : Sends the channel number you
entered.
Control
Select the sub item(Off or On) using the …† buttons,
then press the ENTER button.
•
Off : Turns off the cable box or satellite receiver
control function.
Select this if you do not want to use the supplied
set top box controller.
•
On : Turns on the cable box or satellite receiver
control function.
Set Top Box Test
Select Set Top Box Test using the …† buttons, then
press the ENTER or œ√ button. System menu will be
displayed.
Set Top Box Control
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
Brand Code : 0000
√√
Connection : CH3
√√
CH Digit Lock : Off
√√
Mode for SET button : Off
√√
Control : Off
√√
Set Top Box Test
√√
Off
Mode 1
Mode 2
Set Top Box Control
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
Brand Code : 0000
√√
Connection : CH3
√√
CH Digit Lock : Off
√√
Mode for SET button : Off
√√
Control : Off
√√
Set Top Box Test
√√
Off
On
Set Top Box Control
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
Is your Set Top Box now tuned to channel 28?
NoYes
Set Top Box Control
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
Brand Code : 0000
√√
Connection : CH3
√√
CH Digit Lock : Off
√√
Mode for SET button : Off
√√
Control : Off
√√
Set Top Box Test
√√
Off
Lock to two digits
■
If "Mode 1" does not work, try "Mode 2."
■
If your cable box or satellite receiver does not
respond to either setting, contact the
manufacturer of the cable box or satellite
receiver.
NOTE
■
If you cannot get the recorder to control your
cable box/satellite receiver.
Check the connection and position of the IR
Blaster cable.(page16)
If your cable box or satellite receiver still does
not operate with this recorder, contact your
cable company to see if they can provide you
with a compatible cable box or satellite receiver.
NOTE
01050A-R145-XAA-ENG-31-47 2006.4.11 6:3 PM Page 39