Filter
Top Products
60 - English
Playback
1
Press the OPEN/CLOSE button.
The tray opens.
2
Place a disc gently into the tray with the disc’s
label facing up.
For DVD-RAM discs, insert the printed side facing up.
3
Press the OPEN/CLOSE button to close the disc
tray.
• Your DVD Recorder closes the disc tray and loads the
disc automatically.
• When the recorder is powered on and a disc is in the
tray, the unit will be activated and wait in Stop mode.
• Press PLAY( ) button to start playback.
• If you want the unit to play automatically when it is
powered off with a disc in the unit, power on with the
PLAY( ) button.
4
Press the STOP
()
button to stop playback.
■
This DVD recorder can only operate with discs that
are compatible with DVD-RAM Standard Version 2.0.
■
Playback and/or recording may not work for
some types of discs, or when specific
operations, such as angle change and aspect
ratio adjustment, are being performed.
Information about the discs is written in detail
on the box. Please refer to this if necessary.
■
Do not allow the disc to become dirty or scratched.
Fingerprints, dirt,dust,scratches or deposits of
cigarette smoke on the recording surface may
make it impossible to use the disc for recording.
■
DVD-RAM/±RW/±R discs may not be able to
play on some DVD players, depending on the
player, disc and the condition of the recording.
■
Discs with PAL programs recorded on them
can not be recorded on using this product.
NOTE
■
When you stop playing the disc, the recorder remembers
where you stopped. When you press PLAY button again,
it will pick up where you left off. (unless the disc is
removed or the recorder is unplugged, or if you do not
press the STOP button twice.) This function is only
applicable to DVD-VIDEO, DVD-RAM, DVD±RW, DVD±R
or audio CDs (CD-DA).
NOTE
■
Do not move your DVD recorder while
playing, as this may cause damage to the
disc.
■
Make sure to press the OPEN/CLOSE
button to open or close the disc tray.
■
Do not push the disc tray while it is being
opened or closed, as this may cause a
product malfunction.
■
Do not place foreign materials on or in the
disc tray.
■
Some functions may perform differently or be
disabled depending on the disc type.
If this occurs, refer to the instructions written
on the disc case.
■
Be especially careful that children's fingers
are not caught between the disc tray and the
tray chassis when it closes.
■
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow
playback and may cause damage to the
DVD player.
Caution
Playing a Disc
Discs that cannot be played
• DVD-Video with a region number other than “1” or “ALL”
• 5” 2.6 GB and 5.2 GB DVD-RAM
• 3.9 GB DVD-R Disc for Authoring.
• A DVD±R/DVD-RW(V) disc which has been recorded and not
finalized in a different manufacturer's recorder.
• PAL discs
• DVD-ROM/PD/MV-Disc, etc.
• Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I
01050A-R145-XAA-ENG-59-76 2006.4.11 6:5 PM Page 60