Samsung DVD-R155 DVD Recorder User Manual


 
3
Press the REC MODE button repeatedly to select
the recording speed(quality).
SP
LP
EP
XP
4
Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables Digital camcorder control appears on the top
of the screen.
5
Select the PLAY ( ) icon on the upper part of the
screen to playback the camcorder and find the
starting position to copy.
6
To start recording, select REC( ) icon in the top side
of the screen using the
œ√
buttons, then press the
ENTER button.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
When using DVD-RAM/DVD
±
RW/ DVD
±
R discs,
the message ‘Updating the information of disc.
Please wait for a moment’ is displayed
.
You can not change the record mode and
input source while recording.
Recording will stop automatically if there is
no free space left for recording.
Up to 99 titles can be recorded onto a
DVD-RAM/-RW/-R disc, and up to 48 titles
onto a DVD+RW/+R disc.
DVD-RAM/DVD
±
RW/ DVD+R discs must
be formatted before starting to record.
Most new discs are sold unformatted.
Do not use DVD-R authoring discs with
this unit.
To access on-screen controls during
recording, press the
œ
or
buttons.
When copying from a camcorder and the
end of the tape is reached (no Video), the
screen may turn blue or purple.
NOTE
42 - English
Recording
Record Mode XP (01:11)
SELECTMOVE RETURN
DV
The DV device is connected
To pause recording
Press the PLAY/PAUSE ( ) button to pause
recording in progress.
Press the PLAY/PAUSE ( ) button again to resume
recording.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
When using DVD-RAM/DVD
±
RW/ DVD
±
R discs,
the message ‘Updating the information of disc.
Please wait for a moment.’ is displayed.
You may control a Digital Camcorder using the IEEE1394
(DV) interface.
Check that the disc has enough available space for the
recording. Adjust the record mode. See pages 27 to see
how to connect the camcorder to your DVD recorder.
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
You can not change the recording mode
and input source during recording.
Recording will stop automatically if there is
no free space left for recording.
Up to 99 titles can be recorded onto a
DVD-RAM/-RW/-R disc, and up to 48 titles
onto a DVD+RW/+R disc.
Recording will stop automatically if a copy
protected image is selected.
If you are using a Cable Box(no antenna),
you cannot watch a different cable TV
program from the one you're recording.
DVD-RAM/DVD
±
RW/ DVD+R discs must
be formatted before starting to record.
Most new discs are sold unformatted.
Do not use DVD-R authoring discs with
this unit.
NOTE
Copying from a Camcorder
Before you start