Filter
Top Products
English-18
9 If you know the number of the channel to be stored,
Press the or button to select
Channel
and then press the
ENTER
button.
Select C (Air channel) or S (Cable channel) by pressing the
or button.
Press the button to select channel.
Select the required number by pressing the or button and
then press the
ENTER
button.
If there is an abnormal sound or no sound, re-select the sound
system required.
You can also set a
channel
by pressing number buttons on the
remote control.
10 If you do not know the channel numbers, press the or button
to select
Search
and then press the
ENTER
button.
Search
by pressing
the
or button and then press the
ENTER
button.
Result
: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
11 Press the or button to select
Store
.
Select
Ok
by pressing the
ENTER
button.
Result
: The channel and associated programme number are
stored.
12 Repeat steps 9 to 11 for each channel to be stored.
13 Press the
MENU
button to return to the previous menu or press
the
EXIT
button to return to normal viewing.
Channel mode
P
(Programme mode): When tuning is completed, the
broadcasting stations in your area will have been assigned
to position numbers from P00 to P99. You can select a
channel by entering the position number in this mode.
C (Real channel mode): You can select a channel by
entering the assigned number to each broadcast station in
this mode.
S (Cable channel mode): You can select a channel by
entering the assigned number to each cable channel in this
mode.
Storing Channels Manually
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 18