Filter
Top Products
English-70
This contains information on CAM inserted in the CI slot and displays it.
1 Press the D.MENU button.
Result
: The DTV menu is displayed.
2 Press the or button to select System.
Result
: The options available in the System group are displayed.
3 Press the ENTER button.
4 Press the or button to select Common Interface.
Press the ENTER button.
5 Press the ENTER button to display the information for your
application.
6 Press the D.MENU button to return to the previous menu or press
the EXIT button to return to normal viewing.
The Application Info inserting is about the CI card.
You can install the CAM anytime whether the TV is ON or OFF.
1. Purchase the CI CAM module by visiting your nearest dealer or
by phone.
2. Insert the CI card into the CAM in the direction of the arrow until
it fits.
3. Insert the CAM with the CI card installed into the common
interface slot.
Note: Insert the CAM in the direction of the arrow,
right up to the end so that it is parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
Viewing Common Interface
02 BN68-00905A-X0Eng.qxd 4/6/05 3:15 PM Page 70