Samsung P2770HD Flat Panel Television User Manual


 
1-3 Major Safety Precautions
Caution
Installation Related
Warning
Avoid unplugging the power plug while the
product is operating.
Otherwise, it may damage the product
due to electric shock.
Make sure to use only the power cord sup-
plied by our company. In addition, do not use
the power cord of another electric appliance.
Otherwise, it may result in electric shock
or fire.
When unplugging the power plug from the
wall outlet, make sure to hold it by the plug
and not by the cord.
Otherwise, it may result in electric shock
or fire.
Connect the power plug to a wall outlet that
can be easily reached.
When a problem occurs with the product,
you must unplug the power plug to cut
the power off completely. You cannot cut
the power off completely using only the
power button on the product.
Avoid placing burning candles, mosquito-
repellentor cigarettes on the product.
Otherwise, it may result in fire.
Ask an installation engineer or relevant
company to install the product onto the wall.
Otherwise, it may result in injury.
Make sure to use the specified wall
mount.
Avoid installing the product in a badly-venti-
lated location such as inside a bookshelf or
closet.
Otherwise, it may result in fire due to
internal over-heating.
Keep a distance of at least 10 cm(3.93
inches) from the wall when installing the
product for ventilation.
Otherwise, it may result in fire due to
internal over-heating.
Keep the plastic bags used to pack the
product away from children.
If children place the plastic bags over
their heads, they may suffocate.
Avoid installing the product in a location that
is unstable or exposed to excessive vibra-
tion such as on an unstable or slanted shelf.
The product may fall and this may result
in damage to the product or injury.
If you use the product in a location
exposed to excessive vibrations, it may
result in a problem with the product or
fire.
Avoid installing the product in a location
exposed to dust, moisture (sauna), oil,
smoke or water (rain drops) and installing it
within a vehicle.
This may result in electric shock or fire.
Avoid installing the product in a location
exposed to direct sunlight and installing the
product near a heat source such as a fire-
place or heater.
This may shorten the product life cycle
or cause fire.