Filter
Top Products
When you start using your PDP Monitor for the first time, you must
select the language which will be used for displaying menus and
indications.
1 Press the MENU ()button.
Result
: The main menu is displayed.
2 Press the … or † button to select Setup.
Result
: The Setup menu is displayed.
3 Press the ENTER () button.
4 Press the … or † button to select Language.
Press the
ENTER () button.
Result
: The available languages are listed.
5 Select the appropriate language by pressing the … or † button.
Press the
ENTER () button.
Choosing Your Language
The mains lead is attached to the rear of your PDP Monitor.
1 Plug the mains lead into an appropriate socket.
Result
: The Standby indicator on the front of the PDP Monitor
lights up.
➢
The main voltage is indicated on the rear of the PDP
Monitor and the frequency is 50 or 60Hz.
2 Press the “ ” button on the front of the PDP Monitor (or the ON
() button on the remote control) to switch the PDP Monitor on.
3 To switch your PDP Monitor off, press the “ ” button again (or
the
OFF () button on the remote control).
T
Front of the PDP Monitor
Switching Your PDP Monitor On and Off
English - 15
Time
√√
Language : English
√√
PC
√√
Setup
Move Enter Return
TV
Time
Language : English
PC
Setup
Move Enter Return
TV
English
Français
Deutsch
Italiano
Español
Português
††
BN68-00848A-00Eng_0404 4/4/05 3:58 PM Page 15